https://cuttersettool.com Thu, 22 Oct 2026 09:26:39 +0000 en-US hourly 1 https://cuttersettool.com/2026/10/13/electric-leather-peeling-skiving-machine-shovel-with-brushless-servo-motor-600w/ https://cuttersettool.com/2026/10/13/electric-leather-peeling-skiving-machine-shovel-with-brushless-servo-motor-600w/#comments Tue, 13 Oct 2026 21:09:42 +0000 https://cuttersettool.com/2026/10/13/electric-leather-peeling-skiving-machine-shovel-with-brushless-servo-motor-600w/

















SM-801 Electric Leather Skiving Machine Leather Skin Shovel Cutter w/Servo Motor. SM-801 Leather Skiving Machine DIY Leather Shoveling Thinning Skin Peeling Skiver 1200rpm. Skiving Machine Leather Shovel Skin Cutter Skiver. This machine should be equipped with motor: Servo Motor. Note: the positioner is not included in the package. Max Width of skiving: 15mm. This thinning product machine before use, such as shoes, bags, gloves, belts. Wallets and other sewing techniques, and adapted to the edge and flat thinning leather, felt, plastic, rubber. 600W Split DC Servo Motor Industrial Sewing Machine Servo Motor Mute Low Noise. High precision, low noise drive, almost no vibration, Energy saving and environmental protection. Quick start, braking power, responsive, high sensitivity, the starting speed can be adjusted according to the product requirement. Large range of adjustable speed. Unique tie bar design, changed the original design, so that you can work easily. Easy to install, the same as the general motor installation method, without any modification. For Industrial sewing machine with clutch motor, such as high head machine, zigzag seam, layering machine, high machine, flat machine, package sewing machine, flat sewing machine, etc. Type: Energy saving motor. 1 x Motor set. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Max Width of Skiving.

]]> https://cuttersettool.com/2026/10/13/electric-leather-peeling-skiving-machine-shovel-with-brushless-servo-motor-600w/feed/ 0 https://cuttersettool.com/2026/08/14/electric-leather-skiver-skiving-peeling-machine-600w-brushless-servo-motor-set-2/ https://cuttersettool.com/2026/08/14/electric-leather-skiver-skiving-peeling-machine-600w-brushless-servo-motor-set-2/#comments Fri, 14 Aug 2026 06:32:42 +0000 https://cuttersettool.com/2026/08/14/electric-leather-skiver-skiving-peeling-machine-600w-brushless-servo-motor-set-2/













Electric Leather Skiver Skiving Peeling Machine & 600W Brushless Servo Motor Set. SM-801 Leather Skiving Machine DIY Leather Shoveling Thinning Skin Peeling Skiver 1200rpm. Skiving Machine Leather Shovel Skin Cutter Skiver. Maximum width of a shovel pin :50mm. This thinning product machine before use, such as shoes, bags, gloves, belts. Wallets and other sewing techniques, and adapted to the edge and flat thinning leather, felt, plastic, rubber. 600W Split DC Servo Motor Industrial Sewing Machine Servo Motor Mute Low Noise. High precision, low noise drive, almost no vibration, Energy saving and environmental protection. Quick start, braking power, responsive, high sensitivity, the starting speed can be adjusted according to the product requirement. Large range of adjustable speed. Unique tie bar design, changed the original design, so that you can work easily. Easy to install, the same as the general motor installation method, without any modification. For Industrial sewing machine with clutch motor, such as high head machine, zigzag seam, layering machine, high machine, flat machine, package sewing machine, flat sewing machine, etc. Type: Energy saving motor. 1 x Motor set. Welcome to highcredit1188?? Welcome to our store for shopping!!! ???? Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Great Durability, Exquisite Appearance, High-quality. ? High Performance?? High Safety?? Good Stability?? Premium Material? Long Service Life? Creative Design? Original size design fits perfectly. Max Width of Skiving.

]]> https://cuttersettool.com/2026/08/14/electric-leather-skiver-skiving-peeling-machine-600w-brushless-servo-motor-set-2/feed/ 0 https://cuttersettool.com/2026/08/03/electric-leather-skiver-skiving-peeling-machine-600w-brushless-servo-motor-set/ https://cuttersettool.com/2026/08/03/electric-leather-skiver-skiving-peeling-machine-600w-brushless-servo-motor-set/#comments Mon, 03 Aug 2026 06:10:44 +0000 https://cuttersettool.com/2026/08/03/electric-leather-skiver-skiving-peeling-machine-600w-brushless-servo-motor-set/













Electric Leather Skiver Skiving Peeling Machine & 600W Brushless Servo Motor Set. SM-801 Leather Skiving Machine DIY Leather Shoveling Thinning Skin Peeling Skiver 1200rpm. Skiving Machine Leather Shovel Skin Cutter Skiver. Maximum width of a shovel pin :50mm. This thinning product machine before use, such as shoes, bags, gloves, belts. Wallets and other sewing techniques, and adapted to the edge and flat thinning leather, felt, plastic, rubber. 600W Split DC Servo Motor Industrial Sewing Machine Servo Motor Mute Low Noise. High precision, low noise drive, almost no vibration, Energy saving and environmental protection. Quick start, braking power, responsive, high sensitivity, the starting speed can be adjusted according to the product requirement. Large range of adjustable speed. Unique tie bar design, changed the original design, so that you can work easily. Easy to install, the same as the general motor installation method, without any modification. For Industrial sewing machine with clutch motor, such as high head machine, zigzag seam, layering machine, high machine, flat machine, package sewing machine, flat sewing machine, etc. Type: Energy saving motor. 1 x Motor set. Welcome to highcredit1188?? Welcome to our store for shopping!!! ???? Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Great Durability, Exquisite Appearance, High-quality. ? High Performance?? High Safety?? Good Stability?? Premium Material? Long Service Life? Creative Design? Original size design fits perfectly. Max Width of Skiving.

]]> https://cuttersettool.com/2026/08/03/electric-leather-skiver-skiving-peeling-machine-600w-brushless-servo-motor-set/feed/ 0 https://cuttersettool.com/2025/07/17/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-43/ https://cuttersettool.com/2025/07/17/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-43/#comments Fri, 18 Jul 2025 03:44:44 +0000 https://cuttersettool.com/2025/07/17/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-43/












Electric Pipe Cutter Kit Pipe Threader Tool Set Threading Machine & 6 Dies. 2300w 50hz 25 R / Min Electric Tapping Machine Pipe Cutter 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 Inch. Compact Hand Design: the Compact Hand Design on the Handle Saves Your Labor and Doesn’t Make You Feel Fatigued Easily. It Also Prevents the Machine from Falling. High Quality: This Machine Is Made of Pure Copper, It Is Durable and Doesn’t Break Easily. Copper Is an Ideal Material for the Threading Machine. Powerful Motor: the Motor of This Machine Is 2300w and Has a High Work Efficiency to save Your Working Time. Six Dies: the Package Comes with Six Dies with the Machine, They Can Meet Your Different Demands for Different Tasks. Tube Holder: You Can Fix the Tube on the Tube Holder, It Can Help You with the Pipes and You Can Work More Conveniently. Fixed Rod: the Rod Can Help You Fix the Pipe and Make the Pipe Attached to Each Other As to How You Want Them to Be. You Can Have a Better Work Performance with This Rod. Suitcase: the Package Comes in a Suitcase, so You Can Store and Carry Them Easily and Don’t Lose the Machine Parts. This Machine Is Suitable for Threading Galvanized Pipes, Iron Pipes, Pp Pipes, and Tubes. It Is Suitable for Threading Various Water, Electric, or Gas Pipes from 20.9mm to 49.6mm. Threading Range: 20.9-49.6mm/0.5-2in. Material: All Copper Wire Machine. Power Type: Alternating Current. Rated Power: 2300 (W). Voltage: 110 V, 50 Hz. Rated Spindle Speed: 25 (R/Min). Size: 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 (Inch). Weight: 15.4kg/33.95lbs. Product Dimensions : 57×14 X31cm/22.44×5.51×12.2in. Outer Pipe Diameter: 22,27,34,42,48,60mm. Inner Pipe Diameter: 15,20,25,32,40,50mm. You Should Select the Corresponding Die Head. The Blade Is Installed from the Right on the Host. Clamp the Tube to Approximately the Same Length As the Arm (L2 Is Approximately Equal to L1). Turn the Front and Rear Switches to the down Arrow Position to Start the Switch and Auxiliary Contacts. For Hard Pipes Such As Stainless Steel Pipes, Galvanized Pipes, Brass When Refueling in Time, Plastic Pipes Without Fuel. Note That the Tube Holder Can Not Be Touched with the Host During the Right Shift, Otherwise It Will Hurt the Host. After the Machine Stopped, Pull up the Reverse Switch and Exit the Tube. This Product Supports the Use of Standard Tubes. 1 X Pipe Threader. 1 X Pipe Clamp. 1 X Fixed Rod. 2 X Carbon Brush. 1 X Oil Can. 1 X Storage Box. Do not directly change the direction of the machine during rotation. Lubricating oil should be added during use. The pipe must be fixed firmly and cannot rotate with the machine. If there is abnormal heating or smoke, power off in time and continue to use after cooling. Add the Lubricating Oil Every Time You Use It. Please Allow 1-3 Cm Error Due to Manual Measurement. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Creative Design, Durable Material, Beautiful Appearance. Stable characteristic, high reliability. 20,9 -49,6mm 1/2 -2. 110 V/ 50 Hz. 57 x 14 x 31 cm. 25 (r / min). 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 (inches).

]]> https://cuttersettool.com/2025/07/17/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-43/feed/ 0 https://cuttersettool.com/2025/07/04/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-42/ https://cuttersettool.com/2025/07/04/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-42/#comments Fri, 04 Jul 2025 15:17:44 +0000 https://cuttersettool.com/2025/07/04/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-42/















Electric Pipe Cutter Kit Pipe Threader Tool Set Threading Machine & 6 Dies. Do not directly change the direction of the machine during rotation. Lubricating oil should be added during use. The pipe must be fixed firmly and cannot rotate with the machine. If there is abnormal heating or smoke, power off in time and continue to use after cooling. Note: The plug is EU plug. 2300W 50HZ 25 r / min Electric tapping machine Pipe cutter 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 inch. Compact Hand Design: The compact hand design on the handle saves your labor and doesn’t make you feel fatigued easily. It also prevents the machine from falling. High Quality: This machine is made of pure copper, it is durable and doesn’t break easily. Copper is an ideal material for the threading machine. Powerful Motor: The motor of this machine is 2300w and has a high work efficiency to save your working time. Six Dies: The package comes with six dies with the machine, they can meet your different demands for different tasks. Tube Holder: You can fix the tube on the tube holder, it can help you with the pipes and you can work more conveniently. Fixed Rod: The rod can help you fix the pipe and make the pipe attached to each other as to how you want them to be. You can have a better work performance with this rod. Suitcase: The package comes in a suitcase, so you can store and carry them easily and don’t lose the machine parts. This machine is suitable for threading galvanized pipes, iron pipes, PP pipes, and tubes. It is suitable for threading various water, electric, or gas pipes from 20.9mm to 49.6mm. Threading range: 20.9-49.6mm/0.5-2in. Material: All copper wire machine. Power type: Alternating current. Rated power: 2300 (W). Rated spindle speed: 25 (r/min). Size: 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 (inch). Weight: 15.4kg/33.95lbs. Product dimensions : 57×14 x31cm/22.44×5.51×12.2in. Outer pipe diameter: 22,27,34,42,48,60mm. Inner pipe diameter: 15,20,25,32,40,50mm. You should select the corresponding die head. The blade is installed from the right on the host. Clamp the tube to approximately the same length as the arm (L2 is approximately equal to L1). Turn the front and rear switches to the down arrow position to start the switch and auxiliary contacts. For hard pipes such as stainless steel pipes, galvanized pipes, brass when refueling in time, plastic pipes without fuel. Note that the tube holder can not be touched with the host during the right shift, otherwise it will hurt the host. After the machine stopped, pull up the reverse switch and exit the tube. This product supports the use of standard tubes. Add the lubricating oil every time you use it. Please allow 1-3 cm error due to manual measurement. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

]]> https://cuttersettool.com/2025/07/04/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-42/feed/ 0 https://cuttersettool.com/2025/06/25/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-41/ https://cuttersettool.com/2025/06/25/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-41/#comments Thu, 26 Jun 2025 02:59:58 +0000 https://cuttersettool.com/2025/06/25/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-41/

















Electric Pipe Cutter Kit Pipe Threader Tool Set Threading Machine & 6 Dies. Do not directly change the direction of the machine during rotation. Lubricating oil should be added during use. The pipe must be fixed firmly and cannot rotate with the machine. If there is abnormal heating or smoke, power off in time and continue to use after cooling. Note: The plug is EU plug. 2300W 50HZ 25 r / min Electric tapping machine Pipe cutter 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 inch. Compact Hand Design: The compact hand design on the handle saves your labor and doesn’t make you feel fatigued easily. It also prevents the machine from falling. High Quality: This machine is made of pure copper, it is durable and doesn’t break easily. Copper is an ideal material for the threading machine. Powerful Motor: The motor of this machine is 2300w and has a high work efficiency to save your working time. Six Dies: The package comes with six dies with the machine, they can meet your different demands for different tasks. Tube Holder: You can fix the tube on the tube holder, it can help you with the pipes and you can work more conveniently. Fixed Rod: The rod can help you fix the pipe and make the pipe attached to each other as to how you want them to be. You can have a better work performance with this rod. Suitcase: The package comes in a suitcase, so you can store and carry them easily and don’t lose the machine parts. This machine is suitable for threading galvanized pipes, iron pipes, PP pipes, and tubes. It is suitable for threading various water, electric, or gas pipes from 20.9mm to 49.6mm. Threading range: 20.9-49.6mm/0.5-2in. Material: All copper wire machine. Power type: Alternating current. Rated power: 2300 (W). Rated spindle speed: 25 (r/min). Size: 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 (inch). Weight: 15.4kg/33.95lbs. Product dimensions : 57×14 x31cm/22.44×5.51×12.2in. Outer pipe diameter: 22,27,34,42,48,60mm. Inner pipe diameter: 15,20,25,32,40,50mm. You should select the corresponding die head. The blade is installed from the right on the host. Clamp the tube to approximately the same length as the arm (L2 is approximately equal to L1). Turn the front and rear switches to the down arrow position to start the switch and auxiliary contacts. For hard pipes such as stainless steel pipes, galvanized pipes, brass when refueling in time, plastic pipes without fuel. Note that the tube holder can not be touched with the host during the right shift, otherwise it will hurt the host. After the machine stopped, pull up the reverse switch and exit the tube. This product supports the use of standard tubes. 1 x Pipe Threader. 1 x Pipe Clamp. 1 x Fixed Rod. 2 x Carbon Brush. 1 x Oil Can. 1 x Storage Box. Add the lubricating oil every time you use it. Please allow 1-3 cm error due to manual measurement. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

]]> https://cuttersettool.com/2025/06/25/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-41/feed/ 0 https://cuttersettool.com/2025/06/13/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-40/ https://cuttersettool.com/2025/06/13/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-40/#comments Sat, 14 Jun 2025 01:38:42 +0000 https://cuttersettool.com/2025/06/13/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-40/















Electric Pipe Cutter Kit Pipe Threader Tool Set Threading Machine & 6 Dies. Do not directly change the direction of the machine during rotation. Lubricating oil should be added during use. The pipe must be fixed firmly and cannot rotate with the machine. If there is abnormal heating or smoke, power off in time and continue to use after cooling. Note: The plug is EU plug. 2300W 50HZ 25 r / min Electric tapping machine Pipe cutter 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 inch. Compact Hand Design: The compact hand design on the handle saves your labor and doesn’t make you feel fatigued easily. It also prevents the machine from falling. High Quality: This machine is made of pure copper, it is durable and doesn’t break easily. Copper is an ideal material for the threading machine. Powerful Motor: The motor of this machine is 2300w and has a high work efficiency to save your working time. Six Dies: The package comes with six dies with the machine, they can meet your different demands for different tasks. Tube Holder: You can fix the tube on the tube holder, it can help you with the pipes and you can work more conveniently. Fixed Rod: The rod can help you fix the pipe and make the pipe attached to each other as to how you want them to be. You can have a better work performance with this rod. Suitcase: The package comes in a suitcase, so you can store and carry them easily and don’t lose the machine parts. This machine is suitable for threading galvanized pipes, iron pipes, PP pipes, and tubes. It is suitable for threading various water, electric, or gas pipes from 20.9mm to 49.6mm. Threading range: 20.9-49.6mm/0.5-2in. Material: All copper wire machine. Power type: Alternating current. Rated power: 2300 (W). Rated spindle speed: 25 (r/min). Size: 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 (inch). Weight: 15.4kg/33.95lbs. Product dimensions : 57×14 x31cm/22.44×5.51×12.2in. Outer pipe diameter: 22,27,34,42,48,60mm. Inner pipe diameter: 15,20,25,32,40,50mm. You should select the corresponding die head. The blade is installed from the right on the host. Clamp the tube to approximately the same length as the arm (L2 is approximately equal to L1). Turn the front and rear switches to the down arrow position to start the switch and auxiliary contacts. For hard pipes such as stainless steel pipes, galvanized pipes, brass when refueling in time, plastic pipes without fuel. Note that the tube holder can not be touched with the host during the right shift, otherwise it will hurt the host. After the machine stopped, pull up the reverse switch and exit the tube. This product supports the use of standard tubes. Add the lubricating oil every time you use it. Please allow 1-3 cm error due to manual measurement. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

]]> https://cuttersettool.com/2025/06/13/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-40/feed/ 0 https://cuttersettool.com/2025/06/13/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-39/ https://cuttersettool.com/2025/06/13/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-39/#comments Fri, 13 Jun 2025 13:37:44 +0000 https://cuttersettool.com/2025/06/13/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-39/

















Electric Pipe Cutter Kit Pipe Threader Tool Set Threading Machine & 6 Dies. Do not directly change the direction of the machine during rotation. Lubricating oil should be added during use. The pipe must be fixed firmly and cannot rotate with the machine. If there is abnormal heating or smoke, power off in time and continue to use after cooling. Note: The plug is EU plug. 2300W 50HZ 25 r / min Electric tapping machine Pipe cutter 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 inch. Compact Hand Design: The compact hand design on the handle saves your labor and doesn’t make you feel fatigued easily. It also prevents the machine from falling. High Quality: This machine is made of pure copper, it is durable and doesn’t break easily. Copper is an ideal material for the threading machine. Powerful Motor: The motor of this machine is 2300w and has a high work efficiency to save your working time. Six Dies: The package comes with six dies with the machine, they can meet your different demands for different tasks. Tube Holder: You can fix the tube on the tube holder, it can help you with the pipes and you can work more conveniently. Fixed Rod: The rod can help you fix the pipe and make the pipe attached to each other as to how you want them to be. You can have a better work performance with this rod. Suitcase: The package comes in a suitcase, so you can store and carry them easily and don’t lose the machine parts. This machine is suitable for threading galvanized pipes, iron pipes, PP pipes, and tubes. It is suitable for threading various water, electric, or gas pipes from 20.9mm to 49.6mm. Threading range: 20.9-49.6mm/0.5-2in. Material: All copper wire machine. Power type: Alternating current. Rated power: 2300 (W). Rated spindle speed: 25 (r/min). Size: 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 (inch). Weight: 15.4kg/33.95lbs. Product dimensions : 57×14 x31cm/22.44×5.51×12.2in. Outer pipe diameter: 22,27,34,42,48,60mm. Inner pipe diameter: 15,20,25,32,40,50mm. You should select the corresponding die head. The blade is installed from the right on the host. Clamp the tube to approximately the same length as the arm (L2 is approximately equal to L1). Turn the front and rear switches to the down arrow position to start the switch and auxiliary contacts. For hard pipes such as stainless steel pipes, galvanized pipes, brass when refueling in time, plastic pipes without fuel. Note that the tube holder can not be touched with the host during the right shift, otherwise it will hurt the host. After the machine stopped, pull up the reverse switch and exit the tube. This product supports the use of standard tubes. 1 x Pipe Threader. 1 x Pipe Clamp. 1 x Fixed Rod. 2 x Carbon Brush. 1 x Oil Can. 1 x Storage Box. Add the lubricating oil every time you use it. Please allow 1-3 cm error due to manual measurement. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 (inches). Creative Design, Durable Material, Beautiful Appearance. 20,9 -49,6mm 1/2 -2. 57 x 14 x 31 cm. 25 (r / min).

]]> https://cuttersettool.com/2025/06/13/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-39/feed/ 0 https://cuttersettool.com/2025/06/11/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-38/ https://cuttersettool.com/2025/06/11/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-38/#comments Thu, 12 Jun 2025 01:34:45 +0000 https://cuttersettool.com/2025/06/11/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-38/

















Electric Pipe Cutter Kit Pipe Threader Tool Set Threading Machine & 6 Dies. Do not directly change the direction of the machine during rotation. Lubricating oil should be added during use. The pipe must be fixed firmly and cannot rotate with the machine. If there is abnormal heating or smoke, power off in time and continue to use after cooling. Note: The plug is EU plug. 2300W 50HZ 25 r / min Electric tapping machine Pipe cutter 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 inch. Compact Hand Design: The compact hand design on the handle saves your labor and doesn’t make you feel fatigued easily. It also prevents the machine from falling. High Quality: This machine is made of pure copper, it is durable and doesn’t break easily. Copper is an ideal material for the threading machine. Powerful Motor: The motor of this machine is 2300w and has a high work efficiency to save your working time. Six Dies: The package comes with six dies with the machine, they can meet your different demands for different tasks. Tube Holder: You can fix the tube on the tube holder, it can help you with the pipes and you can work more conveniently. Fixed Rod: The rod can help you fix the pipe and make the pipe attached to each other as to how you want them to be. You can have a better work performance with this rod. Suitcase: The package comes in a suitcase, so you can store and carry them easily and don’t lose the machine parts. This machine is suitable for threading galvanized pipes, iron pipes, PP pipes, and tubes. It is suitable for threading various water, electric, or gas pipes from 20.9mm to 49.6mm. Threading range: 20.9-49.6mm/0.5-2in. Material: All copper wire machine. Power type: Alternating current. Rated power: 2300 (W). Rated spindle speed: 25 (r/min). Size: 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 (inch). Weight: 15.4kg/33.95lbs. Product dimensions : 57×14 x31cm/22.44×5.51×12.2in. Outer pipe diameter: 22,27,34,42,48,60mm. Inner pipe diameter: 15,20,25,32,40,50mm. You should select the corresponding die head. The blade is installed from the right on the host. Clamp the tube to approximately the same length as the arm (L2 is approximately equal to L1). Turn the front and rear switches to the down arrow position to start the switch and auxiliary contacts. For hard pipes such as stainless steel pipes, galvanized pipes, brass when refueling in time, plastic pipes without fuel. Note that the tube holder can not be touched with the host during the right shift, otherwise it will hurt the host. After the machine stopped, pull up the reverse switch and exit the tube. This product supports the use of standard tubes. 1 x Pipe Threader. 1 x Pipe Clamp. 1 x Fixed Rod. 2 x Carbon Brush. 1 x Oil Can. 1 x Storage Box. Add the lubricating oil every time you use it. Please allow 1-3 cm error due to manual measurement. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 (inches). Creative Design, Durable Material, Beautiful Appearance. 20,9 -49,6mm 1/2 -2. 57 x 14 x 31 cm. 25 (r / min).

]]> https://cuttersettool.com/2025/06/11/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-38/feed/ 0 https://cuttersettool.com/2025/06/09/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-37/ https://cuttersettool.com/2025/06/09/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-37/#comments Mon, 09 Jun 2025 13:29:42 +0000 https://cuttersettool.com/2025/06/09/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-37/















Electric Pipe Cutter Kit Pipe Threader Tool Set Threading Machine & 6 Dies. Do not directly change the direction of the machine during rotation. Lubricating oil should be added during use. The pipe must be fixed firmly and cannot rotate with the machine. If there is abnormal heating or smoke, power off in time and continue to use after cooling. Note: The plug is EU plug. 2300W 50HZ 25 r / min Electric tapping machine Pipe cutter 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 inch. Compact Hand Design: The compact hand design on the handle saves your labor and doesn’t make you feel fatigued easily. It also prevents the machine from falling. High Quality: This machine is made of pure copper, it is durable and doesn’t break easily. Copper is an ideal material for the threading machine. Powerful Motor: The motor of this machine is 2300w and has a high work efficiency to save your working time. Six Dies: The package comes with six dies with the machine, they can meet your different demands for different tasks. Tube Holder: You can fix the tube on the tube holder, it can help you with the pipes and you can work more conveniently. Fixed Rod: The rod can help you fix the pipe and make the pipe attached to each other as to how you want them to be. You can have a better work performance with this rod. Suitcase: The package comes in a suitcase, so you can store and carry them easily and don’t lose the machine parts. This machine is suitable for threading galvanized pipes, iron pipes, PP pipes, and tubes. It is suitable for threading various water, electric, or gas pipes from 20.9mm to 49.6mm. Threading range: 20.9-49.6mm/0.5-2in. Material: All copper wire machine. Power type: Alternating current. Rated power: 2300 (W). Rated spindle speed: 25 (r/min). Size: 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 (inch). Weight: 15.4kg/33.95lbs. Product dimensions : 57×14 x31cm/22.44×5.51×12.2in. Outer pipe diameter: 22,27,34,42,48,60mm. Inner pipe diameter: 15,20,25,32,40,50mm. You should select the corresponding die head. The blade is installed from the right on the host. Clamp the tube to approximately the same length as the arm (L2 is approximately equal to L1). Turn the front and rear switches to the down arrow position to start the switch and auxiliary contacts. For hard pipes such as stainless steel pipes, galvanized pipes, brass when refueling in time, plastic pipes without fuel. Note that the tube holder can not be touched with the host during the right shift, otherwise it will hurt the host. After the machine stopped, pull up the reverse switch and exit the tube. This product supports the use of standard tubes. Add the lubricating oil every time you use it. Please allow 1-3 cm error due to manual measurement. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

]]> https://cuttersettool.com/2025/06/09/electric-pipe-cutter-kit-pipe-threader-tool-set-threading-machine-6-dies-37/feed/ 0