https://cuttersettool.com Sat, 16 May 2026 03:13:46 +0000 en-US hourly 1 https://cuttersettool.com/2026/03/29/large-rare-vintage-millinery-christmas-holly-leaf-tool-mold-cutter-set-26-2/ https://cuttersettool.com/2026/03/29/large-rare-vintage-millinery-christmas-holly-leaf-tool-mold-cutter-set-26-2/#comments Sun, 29 Mar 2026 12:42:45 +0000 https://cuttersettool.com/2026/03/29/large-rare-vintage-millinery-christmas-holly-leaf-tool-mold-cutter-set-26-2/







This is beautiful just as something to set around even if you never intend to use it. It has a gorgeous patina. Imagine all the leaves that were actually made with this. This is a really rare 3 piece set that’s complete. Makes a large Holly leaf. At first I was a little puzzled and thought it might be a Maple leaf but then saw a little bit of silver foil clinging to the mold and realized it had been used with silver foil paper to make Christmas Holly leaves. You don’t have to always use fabric with the molds. You can use foil paper or other papers. Just experiment a little. First, there is the cutter. It’s 5 inches tall and the cutter head is about 4 inches across and 3 1/2 inches long. Please note that it’s not like cutting out cookies. You’ll need a heavy rubber mallet and a LOT of force The cutter is made of iron. There is also a 2 part leaf mold complete with top and bottom. The bottom and top parts are made of I believe bronze. Top is 4 inches wide by 9 inches long including the wood handle. It’s 1 1/4 inches thick. The bronze bottom is 4 1/2 by 3 1/2 inches. It’s one inch thick. When you put the top and bottom together it’s 1 3/4th inch thick. You could clean this up a bit more and have it as shiny as the day it was made if you like. I do put a light coating of beeswax on it to keep any iron parts from rusting.

]]> https://cuttersettool.com/2026/03/29/large-rare-vintage-millinery-christmas-holly-leaf-tool-mold-cutter-set-26-2/feed/ 0 https://cuttersettool.com/2025/10/07/large-formattile-cutter-manual-ceramic-tile-cutting-tool-with-built-in-suction/ https://cuttersettool.com/2025/10/07/large-formattile-cutter-manual-ceramic-tile-cutting-tool-with-built-in-suction/#comments Tue, 07 Oct 2025 06:26:47 +0000 https://cuttersettool.com/2025/10/07/large-formattile-cutter-manual-ceramic-tile-cutting-tool-with-built-in-suction/













Large Formattile Cutter, Manual Ceramic Tile Cutting Tool with Built-In Suction Cups & Tile Clamp, 3-Head Scoring Wheel System, for up to 0.47-Inch Thick Tiles (Red, 110-Inch). 44 x 13 x 5 inches. Upgraded Three-Blade System? Featuring a rotary three-blade design, this ceramic tile cutter provides three interchangeable blades to suit various ceramic tile materials. This upgrade delivers cleaner cuts, better adaptability, and enhanced precision with minimal effort. Cuts Extra-Large Tiles with Ease? Designed for professional use, our large-format tile cutter handles ceramic, porcelain, and stone tiles up to 110 in (2.8 m) long and 0.16-0.47 in (4-12 mm) thick – far beyond the 48-inch limit of traditional cutters. Perfect for oversized tiles in modern installations. Heavy-Duty Wear-Resistant Rollers? Equipped with multiple wear-resistant rollers and a precision bite track, this tile cutter ensures stable, wobble-free operation for smooth, consistent scoring every time. Dual Auxiliary Handle Upgrade? Two ergonomic auxiliary handles reduce cutting effort and boost work efficiency, allowing you to complete large projects with greater control and comfort. Usage Tips & Support? For best results, place tiles on a flat, sturdy workbench or floor to maintain even cutting pressure. The guide suction cup works only on smooth, flat tile surfaces and is not suitable for uneven or rough tiles. If you have questions or need assistance, our customer service team is here to help. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help.

]]> https://cuttersettool.com/2025/10/07/large-formattile-cutter-manual-ceramic-tile-cutting-tool-with-built-in-suction/feed/ 0 https://cuttersettool.com/2025/09/12/large-rare-vintage-millinery-fancy-serrated-leaf-tool-mold-cutter-set-27/ https://cuttersettool.com/2025/09/12/large-rare-vintage-millinery-fancy-serrated-leaf-tool-mold-cutter-set-27/#comments Fri, 12 Sep 2025 05:36:47 +0000 https://cuttersettool.com/2025/09/12/large-rare-vintage-millinery-fancy-serrated-leaf-tool-mold-cutter-set-27/







This is beautiful just as something to set around even if you never intend to use it. It has a gorgeous patina. Imagine all the leaves that were actually made with this. This is a really rare 3 piece set that’s complete. Makes a large fancy serrated leaf. First, there is the cutter. It’s 5 1/2 inches tall and the cutter head is about 2 inches across and 3 inches long. Please note that it’s not like cutting out cookies. You’ll need a heavy rubber mallet and a LOT of force The cutter is made of iron. There is also a 2 part leaf mold complete with top and bottom. Top is made of bronze and the bottom made of iron. Top is 1 3/4 inches wide by 8 inches long including the wood handle. It’s 1 1/3 inches thick. The bottom is 2 by 3 1/4 inches. It’s one inch thick. When you put the top and bottom together it’s almost1 3/4th inch thick. The handle is a little loose and if you pull it out and put a little glue in that should go a long ways towards holding it. You could clean this up a bit more and have it as shiny as the day it was made if you like. I do put a light coating of beeswax on it to keep any iron parts from rusting.

]]> https://cuttersettool.com/2025/09/12/large-rare-vintage-millinery-fancy-serrated-leaf-tool-mold-cutter-set-27/feed/ 0 https://cuttersettool.com/2025/05/09/new-large-carbide-mounted-valve-seat-cutter-set-30-45-70-20-degrees-edge-tools/ https://cuttersettool.com/2025/05/09/new-large-carbide-mounted-valve-seat-cutter-set-30-45-70-20-degrees-edge-tools/#comments Fri, 09 May 2025 12:07:44 +0000 https://cuttersettool.com/2025/05/09/new-large-carbide-mounted-valve-seat-cutter-set-30-45-70-20-degrees-edge-tools/






12x Large Carbide Mounted Valve Seat Cutter Set 30 45 70 (20 Degrees) USA. 12x Large Carbide Mounted Valve Seat Cutter. 70°: 1 1/4″, 1 13-16″, 1 3/8. 45°: 1 1/4″, 1 3/16″, 1 5/16″, 1 5/8″, 1 7/16″, 1 1/2″, 1 3/4″, 1 7/8″. (8 pieces) valve guide rod : size 7mm, 8mm, 8.5mm, 9mm, 10mm, 7/16″, 11/32″, 5/16. Cut out hard SEATS. Carbide tipped valve seat cutter set 23x. All pilots are soft and centered on both ends to reduce the OD a bit. This item is made of high quality carbon steel. Each cutter is rated for best results. Ideal for the Classic Car or Old Engine Restorer. Best Use for All Classic Cars, Jeeps, Tractors, Trucks, Motorcycles & Jeeps, Vintage Morris, Mini, Mercedes, Perkins P-6, Leyland. These valve seat cutters are made of hard steel, properly hardened and tempered. Each cutter is of precise quality for best results. This is a must for classic cars, motorcycles, jeeps, tractors and trucks. Is a trusted source for valve seat grinding stones, offering a wide selection for your needs. Due to high demand, some items might be currently unavailable in our USA warehouse. You’ll still get your parcel on time, just as promised. PROUDLY MADE IN INDIA. ? EDGE TOOLS comprises of a dedicated and skilled team of engineers with an aim of providing you tools of highest indian industrial standards. Situated at the industrial hub of. We specialize in providing complete tooling solutions. Our Motto : Right Quality. We ensure the product reaches you at the earliest. We are looking forward to your positive reviews and to build a long term relationship.

]]> https://cuttersettool.com/2025/05/09/new-large-carbide-mounted-valve-seat-cutter-set-30-45-70-20-degrees-edge-tools/feed/ 0 https://cuttersettool.com/2025/04/26/12x-large-carbide-mounted-valve-seat-cutter-set-30-45-70-20-degrees-3-angle-3/ https://cuttersettool.com/2025/04/26/12x-large-carbide-mounted-valve-seat-cutter-set-30-45-70-20-degrees-3-angle-3/#comments Sat, 26 Apr 2025 23:22:23 +0000 https://cuttersettool.com/2025/04/26/12x-large-carbide-mounted-valve-seat-cutter-set-30-45-70-20-degrees-3-angle-3/






12x Large Carbide Mounted Valve Seat Cutter Set 30 45 70 (20 Degrees) 3 ANGLE. 12x Large Carbide Mounted Valve Seat Cutter. 70°: 1 1/4″, 1 13-16″, 1 3/8. 45°: 1 1/4″, 1 3/16″, 1 5/16″, 1 5/8″, 1 7/16″, 1 1/2″, 1 3/4″, 1 7/8″. (8 pieces) valve guide rod : size 7mm, 8mm, 8.5mm, 9mm, 10mm, 7/16″, 11/32″, 5/16. Cut out hard SEATS. Carbide tipped valve seat cutter set 23x. All pilots are soft and centered on both ends to reduce the OD a bit. This item is made of high quality carbon steel. Each cutter is rated for best results. Ideal for the Classic Car or Old Engine Restorer. Track Page Views With.

]]> https://cuttersettool.com/2025/04/26/12x-large-carbide-mounted-valve-seat-cutter-set-30-45-70-20-degrees-3-angle-3/feed/ 0 https://cuttersettool.com/2024/12/18/large-carbide-mounted-valve-seat-cutter-set-30-45-70-20-degrees-bluefoxtools/ https://cuttersettool.com/2024/12/18/large-carbide-mounted-valve-seat-cutter-set-30-45-70-20-degrees-bluefoxtools/#comments Thu, 19 Dec 2024 04:53:05 +0000 https://cuttersettool.com/2024/12/18/large-carbide-mounted-valve-seat-cutter-set-30-45-70-20-degrees-bluefoxtools/











12x Large Carbide Mounted Valve Seat Cutter Set 30 45 70 (20 Degrees) USA. 12x Large Carbide Mounted Valve Seat Cutter. 70°: 1 1/4″, 1 13-16″, 1 3/8. 45°: 1 1/4″, 1 3/16″, 1 5/16″, 1 5/8″, 1 7/16″, 1 1/2″, 1 3/4″, 1 7/8″. (8 pieces) valve guide rod : size 7mm, 8mm, 8.5mm, 9mm, 10mm, 7/16″, 11/32″, 5/16. Cut out hard SEATS. Carbide tipped valve seat cutter set 23x. All pilots are soft and centered on both ends to reduce the OD a bit. This item is made of high quality carbon steel. Each cutter is rated for best results. Ideal for the Classic Car or Old Engine Restorer. Best Use for All Classic Cars, Jeeps, Tractors, Trucks, Motorcycles & Jeeps, Vintage Morris, Mini, Mercedes, Perkins P-6, Leyland. These valve seat cutters are made of hard steel, properly hardened and tempered. Each cutter is of precise quality for best results. This is a must for classic cars, motorcycles, jeeps, tractors and trucks. Is a trusted source for valve seat grinding stones, offering a wide selection for your needs. Due to high demand, some items might be currently unavailable in our USA warehouse. You’ll still get your parcel on time, just as promised. PROUDLY MADE IN INDIA. ? Bluefox Tools comprises of a dedicated and skilled team of engineers with an aim of providing you tools of highest indian industrial standards. Situated at the industrial hub of. We specialize in providing complete tooling solutions. Our Motto : Right Quality. We ensure the product reaches you at the earliest. We are looking forward to your positive reviews and to build a long term relationship.

]]> https://cuttersettool.com/2024/12/18/large-carbide-mounted-valve-seat-cutter-set-30-45-70-20-degrees-bluefoxtools/feed/ 0 https://cuttersettool.com/2024/10/21/large-rare-vintage-millinery-mum-serrated-leaf-tool-mold-bronze-cutter-set-25/ https://cuttersettool.com/2024/10/21/large-rare-vintage-millinery-mum-serrated-leaf-tool-mold-bronze-cutter-set-25/#comments Mon, 21 Oct 2024 12:49:48 +0000 https://cuttersettool.com/2024/10/21/large-rare-vintage-millinery-mum-serrated-leaf-tool-mold-bronze-cutter-set-25/











This is beautiful just as something to set around even if you never intend to use it. It has a gorgeous patina. Imagine all the leaves that were actually made with this. This is a really rare 3 piece set that’s complete. Makes a large finely serrated leaf that looks like a chrysanthemum leaf but it might be something else. This will work great on velvet. The deep indentations are great for velvet fabric. First, there is the cutter. It’s 4 3/4 inches tall and the cutter head is about 2 3/4 inches across and 3 inches long. Please note that it’s not like cutting out cookies. You’ll need a heavy rubber mallet and a LOT of force The cutter is made of iron. There is also a 2 part leaf mold complete with top and bottom. The bottom part is made of I believe iron and is 2 1/2 inches wide by 8 3/4 inches long including the wood handle. It’s one inch thick. The bronze top is 3 by 3 inches. When you put the top and bottom together it’s 1 3/4th inch thick. You could clean this up a bit more and have it as shiny as the day it was made if you like. I think there is still a bit of fabric lint clinging to the indentations of the mold.

]]> https://cuttersettool.com/2024/10/21/large-rare-vintage-millinery-mum-serrated-leaf-tool-mold-bronze-cutter-set-25/feed/ 0 https://cuttersettool.com/2024/07/31/large-rare-vintage-millinery-christmas-holly-leaf-tool-mold-cutter-set-26/ https://cuttersettool.com/2024/07/31/large-rare-vintage-millinery-christmas-holly-leaf-tool-mold-cutter-set-26/#comments Wed, 31 Jul 2024 22:53:18 +0000 https://cuttersettool.com/2024/07/31/large-rare-vintage-millinery-christmas-holly-leaf-tool-mold-cutter-set-26/







This is beautiful just as something to set around even if you never intend to use it. It has a gorgeous patina. Imagine all the leaves that were actually made with this. This is a really rare 3 piece set that’s complete. Makes a large Holly leaf. At first I was a little puzzled and thought it might be a Maple leaf but then saw a little bit of silver foil clinging to the mold and realized it had been used with silver foil paper to make Christmas Holly leaves. You don’t have to always use fabric with the molds. You can use foil paper or other papers. Just experiment a little. First, there is the cutter. It’s 5 inches tall and the cutter head is about 4 inches across and 3 1/2 inches long. Please note that it’s not like cutting out cookies. You’ll need a heavy rubber mallet and a LOT of force The cutter is made of iron. There is also a 2 part leaf mold complete with top and bottom. The bottom and top parts are made of I believe bronze. Top is 4 inches wide by 9 inches long including the wood handle. It’s 1 1/4 inches thick. The bronze bottom is 4 1/2 by 3 1/2 inches. It’s one inch thick. When you put the top and bottom together it’s 1 3/4th inch thick. You could clean this up a bit more and have it as shiny as the day it was made if you like. I do put a light coating of beeswax on it to keep any iron parts from rusting.

]]> https://cuttersettool.com/2024/07/31/large-rare-vintage-millinery-christmas-holly-leaf-tool-mold-cutter-set-26/feed/ 0 https://cuttersettool.com/2024/02/16/12x-large-carbide-mounted-valve-seat-cutter-set-30-45-70-20-degrees-3-angle-2/ https://cuttersettool.com/2024/02/16/12x-large-carbide-mounted-valve-seat-cutter-set-30-45-70-20-degrees-3-angle-2/#comments Fri, 16 Feb 2024 21:27:49 +0000 https://cuttersettool.com/2024/02/16/12x-large-carbide-mounted-valve-seat-cutter-set-30-45-70-20-degrees-3-angle-2/






12x Large Carbide Mounted Valve Seat Cutter Set 30 45 70 (20 Degrees) 3 ANGLE. 12x Large Carbide Mounted Valve Seat Cutter. 70°: 1 1/4″, 1 13-16″, 1 3/8. 45°: 1 1/4″, 1 3/16″, 1 5/16″, 1 5/8″, 1 7/16″, 1 1/2″, 1 3/4″, 1 7/8″. (8 pieces) valve guide rod : size 7mm, 8mm, 8.5mm, 9mm, 10mm, 7/16″, 11/32″, 5/16. Cut out hard SEATS. Carbide tipped valve seat cutter set 23x. All pilots are soft and centered on both ends to reduce the OD a bit. This item is made of high quality carbon steel. Each cutter is rated for best results. Ideal for the Classic Car or Old Engine Restorer. Track Page Views With.

]]> https://cuttersettool.com/2024/02/16/12x-large-carbide-mounted-valve-seat-cutter-set-30-45-70-20-degrees-3-angle-2/feed/ 0 https://cuttersettool.com/2023/10/21/large-automobile-truck-valve-seat-cutter-repair-durable-parts-cutting-tools-set/ https://cuttersettool.com/2023/10/21/large-automobile-truck-valve-seat-cutter-repair-durable-parts-cutting-tools-set/#comments Sat, 21 Oct 2023 18:31:07 +0000 https://cuttersettool.com/2023/10/21/large-automobile-truck-valve-seat-cutter-repair-durable-parts-cutting-tools-set/











Send us a message. Large Automobile Truck Valve Seat Cutter Repair Durable Parts Cutting Tools Set. When reaming the valve, insert the reamer into the positioning arbor, insert the positioning arbor into the valve guide, and then gently press the positioning arbor to rotate the positioning arbor in a clockwise direction. When reaming, the inner and outer cones can be reamed first, and then the working cone can be reamed. The width of the working cone is suitably 1.5 to 1.8 mm. After the reaming is completed, the valve is ground using a valve grinder and can be used. When reaming the valve seat, the force of the pressure bar should not be too large, otherwise it will be awkward, which is not conducive to the grinding of the valve. Valve seat reamer \ valve seat reamer. Special valve seat reamer to repair the reaming and exhaust door seat. 1 set of valve seat reamer. Don’t miss any offers!

]]> https://cuttersettool.com/2023/10/21/large-automobile-truck-valve-seat-cutter-repair-durable-parts-cutting-tools-set/feed/ 0