https://cuttersettool.com Sun, 26 Apr 2026 01:38:44 +0000 en-US hourly 1 https://cuttersettool.com/2020/02/13/110v-1100w-electric-wall-chaser-machine-for-brick-wall-notcher-cutter-tool-set/ https://cuttersettool.com/2020/02/13/110v-1100w-electric-wall-chaser-machine-for-brick-wall-notcher-cutter-tool-set/#comments Thu, 13 Feb 2020 17:50:19 +0000 http://cuttersettool.com/2020/02/13/110v-1100w-electric-wall-chaser-machine-for-brick-wall-notcher-cutter-tool-set/













You may also like. 220V 1100W Electric Wall Chaser Machine for Brick Wall Notcher Cutter Tool Set. Electric Wall Chaser Machine Concrete Cutter Notcher Groove Cutting Machine. The Wall Chaser has powerful functions. It can open chases on wall surface in one cut only. The Wall Chaser is designed to chase on solid/hollow brick walls. This Wall Chaser to chase on concrete, stones. The Wall Chaser is designed to attach itself to the wall once inserted. For a short break, just switch off the Wall Chaser and attach itself to the wall. Keep bystanders, children and visitors away while operating this Wall Chaser. Do not expose this Wall Chaser to rain or wet conditions. When using this Wall Chaser will increase the risk of electric shock. Do not operate the Wall Chaser in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. The Wall Chaser create sparks which may ignite the dust or fumes. The Wall Chaser should not be used to perform work for which it has not been designed e. To cut concrete walls. Use of chaser Wall Chaser for operations different from those intended could result in a hazardous situation. Always wear safety goggles. Avoid accidental starting. Make sure the switch is off before plugging in. Do not carry the Wall Chaser with your fingers on the switch. In case an unexpected jam occurs, switch the power tool off and unplug it from the socket. Do not use the Wall Chaser if the switch does not turn on and off. To avoid injury, never insert fingers or any other objects into the Wall Chaser. Make sure there is no electric cable, water pipe and coal gas pipe inside the wall of chasing route. Use only original parts. Failure to do so may lead to personal injuries. Working with a vacuum cleaner to extract/collect dust which were created by the Wall Chaser. Cutter with a washer. Tool – socket with screwdriver. Tool – cutter wrench. Use to install and remove the cutter. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. It can open chases on wall surface in one cut only. The Wall Chaser is designed to chase on solid/hollow brick walls. Do not use this Wall Chaser to chase on concrete, stones. The Wall Chaser is designed to attach itself to the wall once inserted. Instructions: – Keep bystanders, children and visitors away while operating this Wall Chaser – Do not expose this Wall Chaser to rain or wet conditions. Contact with water when using this Wall Chaser will increase the risk of electric shock. The item “110V 1100W Electric Wall Chaser Machine for Brick Wall Notcher Cutter Tool Set” is in sale since Thursday, July 4, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Notcher Machines”. The seller is “autopartstop666″ and is located in Rowland Heights, California. This item can be shipped to United States.

• Brand: Unbranded
• MPN: Does Not Apply
• Input Power: 1100W
• Rating Voltage: 110V 60Hz
• Speed: 2000RPM
• Maximum Chasing Depth: 30 mm
• Maximum Chasing Width: 30 mm
• Weight: 6.7KG

]]> https://cuttersettool.com/2020/02/13/110v-1100w-electric-wall-chaser-machine-for-brick-wall-notcher-cutter-tool-set/feed/ 0 https://cuttersettool.com/2019/03/10/md40-magnetic-drill-press-7pc-1-hss-cutte-set-annular-cutter-kit-1100w-precise/ https://cuttersettool.com/2019/03/10/md40-magnetic-drill-press-7pc-1-hss-cutte-set-annular-cutter-kit-1100w-precise/#comments Sun, 10 Mar 2019 07:48:52 +0000 http://cuttersettool.com/2019/03/10/md40-magnetic-drill-press-7pc-1-hss-cutte-set-annular-cutter-kit-1100w-precise/













Sign up to Newsletters. 1100W Magnetic Drill Press 2700LBS Magnet Force w/6 pcs HSS Annular Cutter Bits. Applicable to steel structure, shipbuilding, equipment manufacturing, equipment installation, bridge engineering, wind power, drilling rig, power construction, railway manufacturing etc. Weldon Shank Tool Holder. Which can be seen in the development of magnetic drill is precision required. We ordinary operators to understand his basic principles, But in this aspect of the magnetic drill repair the better is professional disassembly assembly or maintenance. On the one hand magnetic drill internal power generated high Voltage, non-professionals may get into life-threatening, the other aspect, the magnetic drilling precision is possible to be affected by non-professional assembly. Make sure to turn off the switch and unplug the power cor, before checking and maintaining. Magnetic drill should be stored in a dry, clean, no corrosive gases and where children can not touch. Save every part in the demolition of magnetic drill and when assembly it is good to put in the original parts. Magnetic drill parts should be often injected into the lubricating oil and keep clean. Magnetic drill maintenance should always be checked regularly, must check the power lines, plugs etc. Introductions of the steel MD40 Magnetic Drill. This package includes the Steel MD40 Magnetic Drill Press and the Tools 7-piece, 1-inch cut depth high-speed steel annular cutter kit. The Steel MD40 Magnetic Drill Press will accept up to 2-inch, high-speed steel annular cutters with a maximum boring diameter of 1-1/2 in. This magnetic drill press will attach directly to the metal drilling surface with a powerful electromagnet. The electromagnet has 2,700 lbs. Of max force and ensures the machine will not move during the drilling process. A secured magnetic drill press provides more leverage than a hand drill, allowing the operator to cut even, consistent holes. The magnet also allows the drill to operate upside down. A full line of 1-inch and 2-inch HSS annular cutters by Steel Dragon Tools are available. Suitable for drilling on any metal surface. Rack and pinion gear system for exact drilling depth. SDT annular cutters will drill large holes up to ten times faster than regular drills bits. Machine-finish hole with no reaming needed when using lubricant. Make overlapping holes, slotting holes, and edge cuts. Bit size is etched on each cutter. Pilot pin helps locate center of hole location. Pilot pin helps eject slug after drilling is complete. During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug. Rated Frequency: 60 Hz. Spindle Speed (No-load Speed). 2700 lbs (12000N) Max Magnetic Force (Thinner Metal = Less Force). Tool Holder: 3/4 in(19.05 mm) Weldon Shank. Overall Weight: 30 Lbs (13.6 Kg). Kit includes six (6) high speed steel annular cutters and one (1) pilot pin. Bit sizes included: 9/16 in15. Mm, 11/16 in18. Mm, 13/16 in21. Mm, 15/16 in24. Mm, 1 in26. Mm, and 1-1/16 in27. Cutting Depth: 1 in25.4. Pilot Pin: 1/4 in(6.34 mm) x 4 in(103 mm). 1 X MD40 Magnetic Drill Press. 1 X Cutter Kit (6 X Core Drill Bit + 1 X Stainless Steel Pot + 1 X Pilot Pin). 1 X User’s Manual. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “MD40 Magnetic Drill Press 7PC 1 HSS Cutte Set Annular Cutter Kit 1100W Precise” is in sale since Tuesday, June 6, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Tools\Drill Presses”. The seller is “greatfunctionitem” and is located in Ontario, California. This item can be shipped to United States, all countries in Europe, Mexico, Australia.

• Brand: VEVOR
• MPN: XZCXZ003
• Model: MD40
• Power Source: 1100W
• Bit Size: 15-27mm
• Maximum Boring Diameter: 40mm
• Maximum Boring Depth: 125mm
• Voltage: 110V
• Spindle Speed (No-load Speed): 550 RPM
• Max Magnetic Force: 12000N
• Tool Holder: 3/4 in(19.05 mm) Weldon Shank

]]> https://cuttersettool.com/2019/03/10/md40-magnetic-drill-press-7pc-1-hss-cutte-set-annular-cutter-kit-1100w-precise/feed/ 0