https://cuttersettool.com Sun, 24 May 2026 15:31:45 +0000 en-US hourly 1 https://cuttersettool.com/2025/01/22/6-pcs-annular-cutter-set-hss-magnetic-drill-bits-34-weldon-shank-2-depth-2/ https://cuttersettool.com/2025/01/22/6-pcs-annular-cutter-set-hss-magnetic-drill-bits-34-weldon-shank-2-depth-2/#comments Wed, 22 Jan 2025 08:04:31 +0000 https://cuttersettool.com/2025/01/22/6-pcs-annular-cutter-set-hss-magnetic-drill-bits-34-weldon-shank-2-depth-2/










Specification: Type: Annular cutter Material: High Speed Steel Shank: 3/4 inch(19.05mm) Cutting Depth: 2 inch (50.8mm) Size:7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2 Cutting Diameter. Material: High Speed Steel. Shank: 3/4 inch(19.05mm). Cutting Depth: 2 inch (50.8mm). Size:7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2 Cutting Diameter. Packing Included: 6pcs Annular cutter Set. Annular cutters are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders. Made of tough high speed steel material, with longer service life and high heat resistance. Applicable materials include wood, various steel materials, steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN. The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material, has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips. Weldon shank, with more stable clamping for stable cutting and finish of holes, shank diameter 3/4 inch(19.05mm), suitable for 120 degree, three points bolt, fastening for fast loading and unloading chuck bit clamp interface. The cutting speed:VC=20-25m/min. The reasonable rotate feed amount shall be fn=0.08-0.13mm/r. The reasonable feed rate shall be vf=36-60mm/min. “Weldon shank” annular cutters have 2 flats and fix in the chuck by tightening grub screws in the two flat areas. Insert the ejector pin inside the annular cutter. Fill the coolant tank with oil lubrication, never use the machine without lubricant.

]]> https://cuttersettool.com/2025/01/22/6-pcs-annular-cutter-set-hss-magnetic-drill-bits-34-weldon-shank-2-depth-2/feed/ 0 https://cuttersettool.com/2024/12/22/6-pcs-annular-cutter-set-hss-magnetic-drill-bits-34-weldon-shank-2-depth/ https://cuttersettool.com/2024/12/22/6-pcs-annular-cutter-set-hss-magnetic-drill-bits-34-weldon-shank-2-depth/#comments Sun, 22 Dec 2024 17:03:42 +0000 https://cuttersettool.com/2024/12/22/6-pcs-annular-cutter-set-hss-magnetic-drill-bits-34-weldon-shank-2-depth/










Specification: Type: Annular cutter Material: High Speed Steel Shank: 3/4 inch(19.05mm) Cutting Depth: 2 inch (50.8mm) Size:7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2 Cutting Diameter. Material: High Speed Steel. Shank: 3/4 inch(19.05mm). Cutting Depth: 2 inch (50.8mm). Size:7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2 Cutting Diameter. Packing Included: 6pcs Annular cutter Set. Annular cutters are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders. Made of tough high speed steel material, with longer service life and high heat resistance. Applicable materials include wood, various steel materials, steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN. The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material, has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips. Weldon shank, with more stable clamping for stable cutting and finish of holes, shank diameter 3/4 inch(19.05mm), suitable for 120 degree, three points bolt, fastening for fast loading and unloading chuck bit clamp interface. The cutting speed:VC=20-25m/min. The reasonable rotate feed amount shall be fn=0.08-0.13mm/r. The reasonable feed rate shall be vf=36-60mm/min. “Weldon shank” annular cutters have 2 flats and fix in the chuck by tightening grub screws in the two flat areas. Insert the ejector pin inside the annular cutter. Fill the coolant tank with oil lubrication, never use the machine without lubricant.

]]> https://cuttersettool.com/2024/12/22/6-pcs-annular-cutter-set-hss-magnetic-drill-bits-34-weldon-shank-2-depth/feed/ 0 https://cuttersettool.com/2024/10/02/11x-hss-annular-cutter-set-34-weldon-shank-with-pilot-pin-for-magnetic-press-2/ https://cuttersettool.com/2024/10/02/11x-hss-annular-cutter-set-34-weldon-shank-with-pilot-pin-for-magnetic-press-2/#comments Wed, 02 Oct 2024 07:12:30 +0000 https://cuttersettool.com/2024/10/02/11x-hss-annular-cutter-set-34-weldon-shank-with-pilot-pin-for-magnetic-press-2/












Specification: Type: Annular cutter Material: High Speed Steel Shank: 3/4 inch(19.05mm) Cutting Depth: 1 inch Size: 1/2″, 9/16″, 11/16″, 5/8″, 3/4″, 13/16″, 7/8″, 15/16″, 1″, 1-1/16″ Note: Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same. Package Including: 11 Pcs Annular Cutter Set. Threading Taps & Dies. Welding Equipment & Accessorie. Jig Saw Blade & Reciprocating. 384 Pieces Sanding Drum Kit Sander Sleeves With Mandrels for Dremel Rotary Tool. 150pcs Resin Cut off Wheel Disc 25mm Metal Cutting Disc for Dremel Rotary Tool. 30pcs Diamond Grinding Carving Cutting Burr Bit Set For Dremel Rotary Tool stone. 252Pcs Sanding Drum Kit Nail Sander Drill Bit 80 Grit For Dremel Rotary Tool. 186pcs Rotary Tool Accessories Kit Grinding Sanding Polishing Set for Dremel. 63Pcs Cutting Wheel Set Drill 1/8 Mandrel for Dremel Rotary Tool Accessories. Material: High Speed Steel. Shank: 3/4 inch(19.05mm). Cutting Depth: 1 inch. Size: 1/2″, 9/16″, 11/16″, 5/8″, 3/4″, 13/16″, 7/8″, 15/16″, 1″, 1-1/16″. Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same. 11 Pcs Annular Cutter Set. Annular cutters made with super tough high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life. 11 HSS core drill bit cutting tool assortment set with Outside Diameter in inches: 1/2″, 9/16″, 11/16″, 5/8″, 3/4″, 13/16″, 7/8″, 15/16″, 1″, 1-1/16″, 1 inch cutting depth for each drill cutter, and 1pc 6.35774.5mm Pilot Pin. CNC-machined high precision annular drill bit set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results. Compatible with various brands of magnetic drills including Alfra, BDS, Dewalt, Euroboor, Hougen, Ruko. Applicable materials include wood, various steel materials, steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN etc. You May Also Like.

]]> https://cuttersettool.com/2024/10/02/11x-hss-annular-cutter-set-34-weldon-shank-with-pilot-pin-for-magnetic-press-2/feed/ 0 https://cuttersettool.com/2024/08/27/11x-hss-annular-cutter-set-34-weldon-shank-with-pilot-pin-for-magnetic-press/ https://cuttersettool.com/2024/08/27/11x-hss-annular-cutter-set-34-weldon-shank-with-pilot-pin-for-magnetic-press/#comments Wed, 28 Aug 2024 04:57:50 +0000 https://cuttersettool.com/2024/08/27/11x-hss-annular-cutter-set-34-weldon-shank-with-pilot-pin-for-magnetic-press/







Specification: Type: Annular cutter Material: High Speed Steel Shank: 3/4 inch(19.05mm) Cutting Depth: 1 inch Size: 1/2″, 9/16″, 11/16″, 5/8″, 3/4″, 13/16″, 7/8″, 15/16″, 1″, 1-1/16″ Note: Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same. Package Including: 11 Pcs Annular Cutter Set. Threading Taps & Dies. Welding Equipment & Accessorie. Jig Saw Blade & Reciprocating. 384 Pieces Sanding Drum Kit Sander Sleeves With Mandrels for Dremel Rotary Tool. 150pcs Resin Cut off Wheel Disc 25mm Metal Cutting Disc for Dremel Rotary Tool. 8Pcs HSS Circular Saw Blade Set For Drill Dremel Rotary Tool Cutting Wheel Discs. 115X Sanding Drum Set Sleeves Abrasive 1/4 1/2” Mandrel for Dremel Rotary Tool. Sand Drum Sleeves for Dremel Rotary Tool Grit 80/100/120/240/320/400/600 Paper. 38X Diamond Mini Circular Saw Blade Cutting Tools For Dremel Rotary Tools. Material: High Speed Steel. Shank: 3/4 inch(19.05mm). Cutting Depth: 1 inch. Size: 1/2″, 9/16″, 11/16″, 5/8″, 3/4″, 13/16″, 7/8″, 15/16″, 1″, 1-1/16″. Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same. 11 Pcs Annular Cutter Set. Annular cutters made with super tough high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life. 11 HSS core drill bit cutting tool assortment set with Outside Diameter in inches: 1/2″, 9/16″, 11/16″, 5/8″, 3/4″, 13/16″, 7/8″, 15/16″, 1″, 1-1/16″, 1 inch cutting depth for each drill cutter, and 1pc 6.35774.5mm Pilot Pin. CNC-machined high precision annular drill bit set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results. Compatible with various brands of magnetic drills including Alfra, BDS, Dewalt, Euroboor, Hougen, Ruko. Applicable materials include wood, various steel materials, steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN etc. You May Also Like.

]]> https://cuttersettool.com/2024/08/27/11x-hss-annular-cutter-set-34-weldon-shank-with-pilot-pin-for-magnetic-press/feed/ 0 https://cuttersettool.com/2024/05/25/us-2-11pcs-hss-annular-cutter-set-716to1-116-2pc-pilot-bits-34-shanks/ https://cuttersettool.com/2024/05/25/us-2-11pcs-hss-annular-cutter-set-716to1-116-2pc-pilot-bits-34-shanks/#comments Sat, 25 May 2024 06:12:58 +0000 https://cuttersettool.com/2024/05/25/us-2-11pcs-hss-annular-cutter-set-716to1-116-2pc-pilot-bits-34-shanks/













US 2” Depth HSS Annular Cutter Set 7/16”to1-1/16” 2pc Pilot Bits 3/4” Shanks. 1 x 7/16”2” Annular Cutter. 1 x 1/2”2” Annular Cutter. 1 x 9/16”2” Annular Cutter. 1 x 5/8”2” Annular Cutter. 1 x 11/16”2” Annular Cutter. 1 x 3/4”2” Annular Cutter. 1 x 13/16”2′. 1 x 7/8”2” Annular Cutter. 1 x 15/16”2” Annular Cutter. 1 x 1”2” Annular Cutter. 1 x 1-1/16”2” Annular Cutter. 1 x 4.74/5.3”102” Pilot Bit. 1 x 6.34/5.3”102” Pilot Bit. Model: HSS Annular cutter. Precision: +0.2mm+0.5mm. Selected Super-hard HSS Materials—-SFX Hass Annular cutters are made of super-hard HSS, which is strong, wear-resistant, efficient, and hasa long service life. Innovative Layered Cutting Design—-Geometric blade design, with good centering and chipping resistance. Advanced Heat Treatment Process—-Complete and advanced heat treatment technology and quality inspection standards to ensure product quality. Product Stability Superior Performance—-Super long life, high comprehensive cost performance.

]]> https://cuttersettool.com/2024/05/25/us-2-11pcs-hss-annular-cutter-set-716to1-116-2pc-pilot-bits-34-shanks/feed/ 0 https://cuttersettool.com/2024/05/05/hss-annular-cutter-set-11pcs-weldon-shank-34-with-pilot-pin-magnetic-drill/ https://cuttersettool.com/2024/05/05/hss-annular-cutter-set-11pcs-weldon-shank-34-with-pilot-pin-magnetic-drill/#comments Sun, 05 May 2024 16:15:55 +0000 https://cuttersettool.com/2024/05/05/hss-annular-cutter-set-11pcs-weldon-shank-34-with-pilot-pin-magnetic-drill/










Specification: Type: Annular cutter Material: High Speed Steel Shank: 3/4 inch(19.05mm) Cutting Depth: 1 inch Size: 1/2″, 9/16″, 11/16″, 5/8″, 3/4″, 13/16″, 7/8″, 15/16″, 1″, 1-1/16″ Package Including: 11 Pcs Annular Cutter Set. PCB Drill Bit & Milling Cutter. Abrasive Tools & Rotary Tools. Power Tools and Accessories. Inch Shank Wood Router Bits. CNC Engraving Router Bits. 1 Flute Spiral end mills. 2 Flute Spiral end mills. CNC Engraving Bit Sets. CNC Carbide End Mill. Flute Flat End Mills. Ball Nose End Mills. Tap and Die Set. CNC HSS Cutting Tools. HSS End Milling Cutter. Brush Cutter Trimmer Head. CNC Cutting Tools Holder. Material: High Speed Steel. Shank: 3/4 inch(19.05mm). Cutting Depth: 1 inch. Size: 1/2″, 9/16″, 11/16″, 5/8″, 3/4″, 13/16″, 7/8″, 15/16″, 1″, 1-1/16″. 11 Pcs Annular Cutter Set. Annular cutters made with super tough high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life. 11 HSS core drill bit cutting tool assortment set with Outside Diameter in inches: 1/2″, 9/16″, 11/16″, 5/8″, 3/4″, 13/16″, 7/8″, 15/16″, 1″, 1-1/16″, 1 inch cutting depth for each drill cutter, and 1pc 6.35774.5mm Pilot Pin. CNC-machined high precision annular drill bit set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results. Compatible with various brands of magnetic drills including Alfra, BDS, Dewalt, Euroboor, Hougen, Ruko. Applicable materials include wood, various steel materials, steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN etc. If you are willing return item back to us, please keep it in original package. You have the right to withdraw from this contract within 1 month without giving a reason. The cancellation period is 1 month from the day on which you or a third party named by you, who is not the carrier, has or has taken possession of the goods. To meet the cancellation deadline, it is sufficient for you to send your notification of exercising your right of cancellation before the cancellation period has expired. We can refuse the repayment until we have received the goods back or until you have provided evidence that you have sent the goods back, whichever is earlier. We bear the costs of the return. Note on exercising the right of withdrawal. In order to exercise your right of withdrawal, you must send us a clear statement e. You can use the attached model withdrawal form for this purpose, but this is not mandatory. If you want to cancel the contract, please fill out this form and send it back. Ordered on / received on. Name of the consumer (s). Address of the consumer (s). Signature of the consumer (s) (only if this is communicated on paper). We value your feedback so we will endeavor to respond to all inquiries within 24 hours. & Public holiday excluded. Your action will help us offer our milk and bread.

]]> https://cuttersettool.com/2024/05/05/hss-annular-cutter-set-11pcs-weldon-shank-34-with-pilot-pin-magnetic-drill/feed/ 0 https://cuttersettool.com/2022/12/01/34-shank-1-12-to-2-12-fly-cutter-set-cutting-milling-hardened-tool-bits/ https://cuttersettool.com/2022/12/01/34-shank-1-12-to-2-12-fly-cutter-set-cutting-milling-hardened-tool-bits/#comments Thu, 01 Dec 2022 14:54:22 +0000 https://cuttersettool.com/2022/12/01/34-shank-1-12-to-2-12-fly-cutter-set-cutting-milling-hardened-tool-bits/







Fly Cutter 3 Pc Set 3/4 Shank + 1 Pc H. S 5/16 Tool Bit. Primarily on a milling machine for machining large, flat surface areas. Tool similar to a lathe tool mounted in a special. Fly Cutters are made of Tool Steel. They each have a 3/4? Parallel shank complete with flat for grub screw. Manufactured from fine quality tool steel. Supplied with Allen keys +. 5/16″ x 5/16″ x 2-1/2 H. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Supplies\Milling Cutters”. The seller is “protools-2018″ and is located in this country: IN. This item can be shipped worldwide.

• Modified Item: No
• Country/Region of Manufacture: India
• Cutting/Head Diameter: 1-1/2\
• Custom Bundle: No
• Mill Cutter Type: Fly Cutter
• Material: Steel
• Supplied with: Allen Key , Wooden Stand
• Number OF Tool Bit: 1 Pc
• Free Shipping: USA
• Packing: Hard Board Box
• Shank Size: 3/4\
• Tool Bit Size: 5/16\
• Brand: AUZAAR

]]> https://cuttersettool.com/2022/12/01/34-shank-1-12-to-2-12-fly-cutter-set-cutting-milling-hardened-tool-bits/feed/ 0