https://cuttersettool.com Fri, 17 Apr 2026 01:20:45 +0000 en-US hourly 1 https://cuttersettool.com/2026/03/05/8pcs-gear-cutters-gear-milling-cutter-set-high-speed-steel-cutting-tool-m1-5/ https://cuttersettool.com/2026/03/05/8pcs-gear-cutters-gear-milling-cutter-set-high-speed-steel-cutting-tool-m1-5/#comments Fri, 06 Mar 2026 00:51:43 +0000 https://cuttersettool.com/2026/03/05/8pcs-gear-cutters-gear-milling-cutter-set-high-speed-steel-cutting-tool-m1-5/










Brand New 8Pcs Gear Cutters Gear Milling Cutter Set High Speed Steel Cutting Tool M1.5 20° 5mm 6mm. This gear milling cutter is a special cutting tool specially designed for milling gears. There are a total of 8 sets of gear cutting tools to suit different numbers of teeth. The size and proportion are uniform to provide a good cutting range and sufficient rigidity. This gear milling cutter is made of high-speed steel, strong and, anti- and. The gear cutter has great workmanship, replacement for the old or damaged one. Specification: Item Type: Gear Cutter Material: High Speed Steel Blade Length: Approx. 5mm / 0.2in Blade Diameter: Approx. 6mm / 0.24in Pressure Angle: 20° Package List: 8 x Gear Cutter. All our products are brand new and sealed. We take our reputation seriously.

]]> https://cuttersettool.com/2026/03/05/8pcs-gear-cutters-gear-milling-cutter-set-high-speed-steel-cutting-tool-m1-5/feed/ 0 https://cuttersettool.com/2025/10/20/8-pcs-m3-25-involute-gear-cutters-module-milling-cutter-set-hss-cutting-tool/ https://cuttersettool.com/2025/10/20/8-pcs-m3-25-involute-gear-cutters-module-milling-cutter-set-hss-cutting-tool/#comments Mon, 20 Oct 2025 06:58:45 +0000 https://cuttersettool.com/2025/10/20/8-pcs-m3-25-involute-gear-cutters-module-milling-cutter-set-hss-cutting-tool/








8 Pcs M3.25 Involute Gear Cutters Module Milling Cutter Set HSS Cutting Tool. Please make sure the OE number matches the part you are replacing. 8Pcs M3.25 Involute Gear Cutters Module 3.25 Milling Cutter Set HSS Cutting Tool. Special cutting tools designed specifically for milling gears, with 8 tools can be provided to suit different numbers of teeth. The size and proportion are uniform to provide a good cutting range and sufficient rigidity. Great workmanship, with straight tooth design suitable for involute gear form. Using high speed steel materials, strong and durable, has a long service life. The outer diameter is about 75mm, the inner diameter is 27mm and the pressure angle is 20°. Item Type: Involute Gear Milling Cutter. Material: High speed steel Outer Diameter: Approx. Bore :27mm Pressure Angle: 20°. 8 xM3.25 Involute Gear Milling Cutter. We will send item to your. International Buyers Please Note. If your package delayed few days, due to any unexpected factor, please wait patiently. Your kindly understanding and great patience would be highly appreciated! For a presumably defective product received, please tell us where the problem occurs, and our Customer Service and Technical Department will work it through with you. Pictures and videos can come in handy here. We wish you understand us, and our effort will always come to your aid. Customer Service got fired if they don’t work things out with you, so knock their door at will. There shall be nothing to worry about as we have confidence to solve your issue. We greatly appreciate your. Do NOT leave negative or neutral feedback without any contact.

]]> https://cuttersettool.com/2025/10/20/8-pcs-m3-25-involute-gear-cutters-module-milling-cutter-set-hss-cutting-tool/feed/ 0 https://cuttersettool.com/2025/07/31/valve-seat-reamer-motorcycle-valveseat-milling-cutter-set-automobile-repair-tool/ https://cuttersettool.com/2025/07/31/valve-seat-reamer-motorcycle-valveseat-milling-cutter-set-automobile-repair-tool/#comments Thu, 31 Jul 2025 16:11:39 +0000 https://cuttersettool.com/2025/07/31/valve-seat-reamer-motorcycle-valveseat-milling-cutter-set-automobile-repair-tool/


Motorcycle special set Applicable valve diameter: 31-22mm Number of pieces: 21 Grinding wheel: 31×45 °/27×45 °/24×45 °/22×45 ° Reamer: 31×45 °/27×45 °/24×45 °/22×45 ° Top chamfer: 31×58 °/27×58 °/24×58 °/22×58 ° Lower chamfer: 30×30 °/26×30 °/23×30 °/20×30 ° Cutter bar: 5MM/5.5MM//wrench/nut/nut Applicable valve diameter: 34-22mm Number of pieces: 23 Grinding wheel 34×45 °/31×45 °/29×45 °/27×45 °/24×45 °/22×45 ° Reamer: 34×45 °/31×45 °/29×45 °/27×45 °/24×45 °/22×45 ° Top chamfer: 34×58 °/27×58 °/24×58 ° Lower chamfer: 30×30 °/26×30 °/23×30 ° Cutter bar: 5MM/5.5MM/6MM/wrench/nut Applicable valve diameter: 31-18 mm Number of pieces: 24 Grinding wheel: 31×45 °/27×45 °/24×45 °/22×45 °/18×45 ° Reamer: 31×45 °/27×45 °/24×45 °/22×45 °/20×45 °/18×45 ° Top chamfer: 31×58 °/24×58 °/22×58 ° Lower chamfer: 30×30 °/26×30 °/20×30 ° Cutter bar: 4MM/4.5MM/5MM/5.5MM/wrench/nut. Note: Due to measurement reasons, there may be an error of about 0.1mm in the size of the guide rod.

]]> https://cuttersettool.com/2025/07/31/valve-seat-reamer-motorcycle-valveseat-milling-cutter-set-automobile-repair-tool/feed/ 0 https://cuttersettool.com/2025/07/22/8pcs-involute-gear-milling-cutter-set-high-speed-steel-cutting-tools-55mm-22mm/ https://cuttersettool.com/2025/07/22/8pcs-involute-gear-milling-cutter-set-high-speed-steel-cutting-tools-55mm-22mm/#comments Tue, 22 Jul 2025 15:53:45 +0000 https://cuttersettool.com/2025/07/22/8pcs-involute-gear-milling-cutter-set-high-speed-steel-cutting-tools-55mm-22mm/













Special cutting tools designed specifically for milling gears, with 8 tools can be provided to suit different numbers of teeth. The size and proportion are uniform to provide a good cutting range and sufficient rigidity. Great workmanship, with straight tooth design suitable for involute gear form. Using high speed steel materials, strong and, has a long service life. The outer diameter is 55mm, the inner diameter is 22mm and the pressure angle is 14.5°. Item Type: Involute Gear Milling Cutter. Material: High speed steel Outer Diameter: Approx. 55mm / 2.2in Inner Hole: Approx. 22mm / 0.9in Pressure Angle: 14.5°. 8 x Involute Gear Milling Cutter. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

]]> https://cuttersettool.com/2025/07/22/8pcs-involute-gear-milling-cutter-set-high-speed-steel-cutting-tools-55mm-22mm/feed/ 0 https://cuttersettool.com/2025/07/16/multiple-size-milling-cutter-set-m2-material-lightweight-straight-shank-mills/ https://cuttersettool.com/2025/07/16/multiple-size-milling-cutter-set-m2-material-lightweight-straight-shank-mills/#comments Thu, 17 Jul 2025 03:42:44 +0000 https://cuttersettool.com/2025/07/16/multiple-size-milling-cutter-set-m2-material-lightweight-straight-shank-mills/
















Specification Color: Blue, Silver Material: High-speed Steel M2 Surface Treatment: Polishing Cutting Depth: 1in Blade Size: 7/16, 1/2, 9/16, 11/16, 5/8, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16 Product Size: 24.524.54.5cm/ 9.89.81.7in Package Size: 27.526.55.5cm/ 10.8310.432.17in Net Weight: 1.2kg/ 2.65lbs Gross Weight: 1.5kg/ 3.31lbs Package Included 1 Set Annular Cutter. Multiple-Size Milling Cutter Set M2 Material Lightweight Straight Shank Mills. Do You Want to Drill Holes Easier and Faster? Then Try This Annular Cutter Set Made of High-quality High-speed Steel M2 Material. It Has Different Sizes of Milling Cutter Bits, so You Can Easily Drill Holes of Different Sizes. The Set Is Not Only Easy for You to Carry Around but Also Convenient for You to Quickly Select the Tools You Need! Drilling Partner: These Annular Bits Drill Large Holes Much Faster than Regular Bits, and Their Magnetic Bits Are Thin-walled with Double Alternating Teeth, Making It Easier to Make Efficient and Aggressive Cuts than Traditional Hole Saws and Twist Bits, Saving You Time and Effort on the Job. Ring Cutting: Its Inserts Are Geometrically Designed, Making It Easy to Punch Holes Even at Awkward Angles. And Because Annular Cutters Have Fewer Teeth and less Wear, Drilling Can Be Done at Faster Cutting Speeds with Ring Cutters. Good Material: This Annular Cutter Set Is Made of High-quality High-speed Steel M2 Material, with Strong Hardness and Good Corrosion Resistance, so It Can Be Used for a Long Time. Complete Specifications: This Is a Complete Set of Annular Cutters That Includes a Variety of Drill Sizes(7/16, 1/2, 9/16, 11/16, 5/8, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16) for Your Convenience. And the Different Sizes of Cutter Heads Provide You with More Precise Drilling. High Portability: with a Weight of 1.2kg/ 2.65lbs, This Annular Cutter Set Is Light Enough to Be Carried Anywhere You Want, Facilitating Your Daily Use. Waste Reduction: These Annular Cutters Re-sharpen and Smooth Burr-free and Smooth Holes, Thus Reducing Scrap and Material Waste for You. Re-sharpening Use: It Can Be Easily Re-sharpened on a Grinding Machine and Can Be Reused for Drilling. Re-grinding Can Be Done Until the Desired Cutting Length Is Available on the Annular Cutter. Neat Storage: We Provide a Storage Box for This Annular Cutter Set, so You Can Store Each Tool Neatly Together, and It Is Also Convenient for You to Quickly Select When Needed. Easy to Clean: You Can Easily Clean It Without Much Effort and Time Because of the Smooth Surface Caused by High-speed Steel M2 and Plastic. If There Is Dust, Just Wipe It off with a Rag. Customer Service: We Aim to Provide Quality Products and Services. We Will Reply and Solve the Problem for You As Soon As Possible. Chip Chute: the Reasonable Chip Chute Design on the Tool Body Can Make the Chip Removal Smoother and Let You Operate More Easily. Pilot Pins: It Is Paired with Pilot Pins That Have the Functions of Positioning, Exporting Coolant, and Ejecting Cores for Your Convenience. Three-edge Segment Cutting: It Uses a Three-edged Segmented Cutting Design, Which Can Maximize the Protection of the Head and Is Not Easy to Chipped Teeth, so You Can Rest Assured of Long-term Use. Straight Shank: It Is Designed with a Non-slip Straight Shank for Better Tightness During Operation, so You Can Use It with Confidence. This Annular Cutter Set Fits Most Standard Magnetic Drills and Machine Tools, Such As Milling Machines with Tool Shanks and Large Drilling Machines. Material: High-speed Steel M2. Blade Size: 7/16, 1/2, 9/16, 11/16, 5/8, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16. Product Size: 24.524.54.5cm/ 9.89.81.7in. Package Size: 27.526.55.5cm/ 10.8310.432.17in. Net Weight: 1.2kg/ 2.65lbs. Gross Weight: 1.5kg/ 3.31lbs. 1 Set Annular Cutter. Please Wear Work Clothes and Protective Glasses to Prevent Splashes of Iron Chips from Hurting Your Skin and Eyes. Please Work with the Product Properly Installed to Prevent Danger. When Installing or Removing the Product, Please Do so with the Power Unplugged or Disconnected. It Is Recommended to Cut with Coolant Cutting, Otherwise, the Life of the Drill Bit Will Be Affected. It Is Recommended to Use It with a Drill Press or Magnetic Drill Press. Please Note That Heat Will Be Generated During the Drilling Process, so Be Careful of Burns and the Impact on the Surrounding Environment. Please Do Not Modify the Product and Carry out Drilling Work Without Permission to Prevent Unforeseen Things from Happening. Please Note That It Is Strictly Forbidden to Touch the Product with Your Hands While It Is Rotating. If Abnormalities Such As Vibration or Sharp Sound Occur During Operation, Please Stop the Operation and Check the Product or Replace It with a New One. Insert the Ejector Pin Inside the Annular Cutter. Do Not Use an Annular Cutter Without an Ejector Pin. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3 Cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

]]> https://cuttersettool.com/2025/07/16/multiple-size-milling-cutter-set-m2-material-lightweight-straight-shank-mills/feed/ 0 https://cuttersettool.com/2025/06/21/5pc-hrc65-5mm681214mm-4flute-milling-cutter-set-end-mill-turning-tool-2/ https://cuttersettool.com/2025/06/21/5pc-hrc65-5mm681214mm-4flute-milling-cutter-set-end-mill-turning-tool-2/#comments Sat, 21 Jun 2025 15:42:53 +0000 https://cuttersettool.com/2025/06/21/5pc-hrc65-5mm681214mm-4flute-milling-cutter-set-end-mill-turning-tool-2/






Ultra-fine particle tungsten steel base material, with high wear resistance and strength. Which can directly rough-process the heat-treated material below 60 degrees. Reducing the times of tool changes and improve the. The 2-blade flat-end milling cutter is mainly groove milling. And the 4-blade flat-bottom milling cutter is mainly side finishing. 1 Our company can meet your needs in both quality and price. After a lot of time of experiments and feedbacks from many factories, most of our products have been able to replace international big brands. Such as Japan, South Korea and Germany brand. We has gained the trust of customers worldwide and Chinese, and there are a lot of orders every day. Please look for the brand zimi-cnc in my shop, which has low price and high quality, the highest technology and the best products made in China. 2 We are the largest factory in China. The stock warehouse has more than 5000 square meters, CNC machine tool specifications 10,000 varieties, we can find almost any model you need here. Our brand promises not to raise prices. Professional technical team, timely response and solve customer. Our products are divided into. High-end products, completely replacing products of Mitsubishi, Toshiba, Chloe, Sandvik and other brands. Mid-end products, higher cost performance, lower price, suitable for small batch processing. Low-end products, such products are of poor quality, good appearance, and are not abrasion resistant, but they can achieve very low prices. We specialize in insert, not a grocery store, all the products we sell are well recognized by the macket. We will not cheat any of our. More products are being updated, please pay attention to my shop.

]]> https://cuttersettool.com/2025/06/21/5pc-hrc65-5mm681214mm-4flute-milling-cutter-set-end-mill-turning-tool-2/feed/ 0 https://cuttersettool.com/2025/06/12/how-to-choose-a-milling-gear-cutter-u0026-buy-one-milling-a-gear-3/ https://cuttersettool.com/2025/06/12/how-to-choose-a-milling-gear-cutter-u0026-buy-one-milling-a-gear-3/#comments Fri, 13 Jun 2025 01:36:37 +0000 https://cuttersettool.com/2025/06/12/how-to-choose-a-milling-gear-cutter-u0026-buy-one-milling-a-gear-3/ ]]> https://cuttersettool.com/2025/06/12/how-to-choose-a-milling-gear-cutter-u0026-buy-one-milling-a-gear-3/feed/ 0 https://cuttersettool.com/2025/05/06/8pcs-involute-gear-milling-cutter-set-high-speed-steel-cutter-14-5-55mm-22mm/ https://cuttersettool.com/2025/05/06/8pcs-involute-gear-milling-cutter-set-high-speed-steel-cutter-14-5-55mm-22mm/#comments Tue, 06 May 2025 23:56:43 +0000 https://cuttersettool.com/2025/05/06/8pcs-involute-gear-milling-cutter-set-high-speed-steel-cutter-14-5-55mm-22mm/













Special cutting tools designed specifically for milling gears, with 8 tools can be provided to suit different numbers of teeth. The size and proportion are uniform to provide a good cutting range and sufficient rigidity. Great workmanship, with straight tooth design suitable for involute gear form. Using high speed steel materials, strong and, has a long service life. The outer diameter is 55mm, the inner diameter is 22mm and the pressure angle is 14.5°. Item Type: Involute Gear Milling Cutter. Material: High speed steel Outer Diameter: Approx. 55mm / 2.2in Inner Hole: Approx. 22mm / 0.9in Pressure Angle: 14.5°. 8 x Involute Gear Milling Cutter. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

]]> https://cuttersettool.com/2025/05/06/8pcs-involute-gear-milling-cutter-set-high-speed-steel-cutter-14-5-55mm-22mm/feed/ 0 https://cuttersettool.com/2025/03/23/17pcs-injector-seat-cutter-milling-cutter-set-universal-car-tool-kit/ https://cuttersettool.com/2025/03/23/17pcs-injector-seat-cutter-milling-cutter-set-universal-car-tool-kit/#comments Sun, 23 Mar 2025 22:10:43 +0000 https://cuttersettool.com/2025/03/23/17pcs-injector-seat-cutter-milling-cutter-set-universal-car-tool-kit/












This injector cutter set is suitable for cleaning and repair of the sealing surfaces of injectors and in the cylinder head. It helps to avoid blow-back due to poorly seated injectors. Comes with a package of 17pcs tools to meet different needs. The blow molded storage case is easy to transport and storage. It is suitable for a wide range of vehicles, suitable for almost all modern common rail engines and motor. Often the seat of the injector has been damaged due to constant erosion from escaping combustion gases. The only way is to resolve this is to reface the injector seat. This set of injector cutters ensures that the injector seat is bored to the exact dimension when replacing or reconditioning the injectors, avoiding blow back and poor emissions. Specification: Condition: 100% Brand New Item Type: Injector Seat Cutter Material: Aluminum Alloy Color: As Picture Shown Applicable : Universal vehicle maintenance Package List: 17 x Injector Seat Cutter Set. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

]]> https://cuttersettool.com/2025/03/23/17pcs-injector-seat-cutter-milling-cutter-set-universal-car-tool-kit/feed/ 0 https://cuttersettool.com/2025/02/03/hss-annular-cutter-set-with-r8-to-34-weldon-shank-adapter-for-milling/ https://cuttersettool.com/2025/02/03/hss-annular-cutter-set-with-r8-to-34-weldon-shank-adapter-for-milling/#comments Mon, 03 Feb 2025 20:44:48 +0000 https://cuttersettool.com/2025/02/03/hss-annular-cutter-set-with-r8-to-34-weldon-shank-adapter-for-milling/













HSS Annular Cutter Set with R8 to 3/4 Weldon Shank Adapter for Milling. Annular Cutter Set: Includes sizes from 7/16″ to 1-1/16″, each with a 1 cutting depth for precise, clean cuts. R8 to 3/4 Weldon Shank: Adapter allows use of annular cutters in Bridgeport and similar milling machines. Durable Construction: Cutters and adapter built for longevity and reliability under tough workshop conditions. Versatility in Application: Ideal for slotting, holemaking, and other milling tasks in various metals. Easy Set-Up and Storage: Comes in a protective blow mold case, enhancing portability and organization. This Accusize Industrial Tools bundle pairs our premium High-Speed Steel (HSS) Professional Annular Cutter Set with the versatile R8 to 3/4 Weldon Shank Arbor Adapter, making it an essential toolkit for professional machinists and fabricators. The annular cutter set features diameters ranging from 7/16″ to 1-1/16″ with a consistent 1 cutting depth, crafted for precision and efficiency in metal removal tasks. The adapter is specially designed for Bridgeport and other milling machines, enabling the use of annular cutters for a broader range of applications. This combination not only maximizes functionality but also increases the efficiency of your milling operations, ensuring clean, burr-free cuts and reliable performance. The set is housed in a robust, blue collar plastic blow mold case, facilitating easy transportation and storage, keeping tools organized and protected. Ideal for creating slots, large holes, and contours in metals, this toolkit enhances capability and precision in any machining environment. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help.

]]> https://cuttersettool.com/2025/02/03/hss-annular-cutter-set-with-r8-to-34-weldon-shank-adapter-for-milling/feed/ 0