https://cuttersettool.com Thu, 30 Apr 2026 14:11:04 +0000 en-US hourly 1 https://cuttersettool.com/2025/04/23/two-of-our-best-selling-stubby-size-hex-key-sets-in-one-convenient-package/ https://cuttersettool.com/2025/04/23/two-of-our-best-selling-stubby-size-hex-key-sets-in-one-convenient-package/#comments Wed, 23 Apr 2025 23:15:32 +0000 https://cuttersettool.com/2025/04/23/two-of-our-best-selling-stubby-size-hex-key-sets-in-one-convenient-package/ ]]> https://cuttersettool.com/2025/04/23/two-of-our-best-selling-stubby-size-hex-key-sets-in-one-convenient-package/feed/ 0 https://cuttersettool.com/2021/05/28/snap-on-tools-3pc-pliers-and-cutter-set-red-pl300cf-new-sealed-in-package/ https://cuttersettool.com/2021/05/28/snap-on-tools-3pc-pliers-and-cutter-set-red-pl300cf-new-sealed-in-package/#comments Fri, 28 May 2021 06:48:02 +0000 http://cuttersettool.com/2021/05/28/snap-on-tools-3pc-pliers-and-cutter-set-red-pl300cf-new-sealed-in-package/






Snap On Tools 3Pc Pliers And Cutter Set Red PL300CF. 8 Talon GripT Combination Slip-Joint Pliers. 7 VectorEdge Diagonal Cutter. 8 Talon GripT Needle Nose Pliers. The item “Snap On Tools 3Pc Pliers And Cutter Set Red PL300CF New Sealed In Package” is in sale since Tuesday, May 4, 2021. This item is in the category “eBay Motors\Automotive Tools & Supplies\Hand Tools\Pliers”. The seller is “crazytooldeals” and is located in Olympic Valley, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

• Brand: Snap-on
• Set or Single Item: Set
• Type: Mixed Set
• Number of Pieces: 3
• Bundle Description: With Tray
• Size: 7 & 8″
• Custom Bundle: Yes
• Manufacturer Part Number: PL300CF 47ACF 87ACF 96ACF
• Country/Region of Manufacture: United States

]]> https://cuttersettool.com/2021/05/28/snap-on-tools-3pc-pliers-and-cutter-set-red-pl300cf-new-sealed-in-package/feed/ 0 https://cuttersettool.com/2021/04/20/snap-on-tools-3pc-plierscutter-set-pl300cfg-new-sealed-in-package/ https://cuttersettool.com/2021/04/20/snap-on-tools-3pc-plierscutter-set-pl300cfg-new-sealed-in-package/#comments Tue, 20 Apr 2021 23:51:31 +0000 http://cuttersettool.com/2021/04/20/snap-on-tools-3pc-plierscutter-set-pl300cfg-new-sealed-in-package/





Snap On Tools 3Pc Pliers/Cutter Set PL300CFG. PL300CFG 47ACF 87ACF 96ACF. 3 pc Pliers/Cutters Set (Green). 8 Talon GripT Combination Slip-Joint. 7 VectorEdge Diagonal Cutter (Green). 8 Talon GripT Needle Nose Pliers (Green). The item “Snap On Tools 3Pc Pliers/Cutter Set PL300CFG New Sealed In Package” is in sale since Sunday, April 11, 2021. This item is in the category “eBay Motors\Automotive Tools & Supplies\Hand Tools\Pliers”. The seller is “crazytooldeals” and is located in Olympic Valley, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

• Brand: Snap-on
• Set or Single Item: Set
• Type: Mixed Set
• Number of Pieces: 3
• Size: 7″ 7.5″ 8″
• Bundle Description: pliers with tray
• Custom Bundle: Yes
• Manufacturer Part Number: PL300CFG 47ACF 87ACF 96ACF
• Country/Region of Manufacture: United States

]]> https://cuttersettool.com/2021/04/20/snap-on-tools-3pc-plierscutter-set-pl300cfg-new-sealed-in-package/feed/ 0 https://cuttersettool.com/2020/11/04/klein-tools-pliers-and-cutters-set-of-5-piecesnew-open-package-2/ https://cuttersettool.com/2020/11/04/klein-tools-pliers-and-cutters-set-of-5-piecesnew-open-package-2/#comments Wed, 04 Nov 2020 11:34:44 +0000 http://cuttersettool.com/2020/11/04/klein-tools-pliers-and-cutters-set-of-5-piecesnew-open-package-2/








Brand new never been used. Out of the package. See pictures for more details. 935RB level J2158cr strippers D2000-48 side cutters D213-9NE 63050 rabbit ears. The item “Klein Tools Pliers And Cutters Set of 5 PiecesNew open Package” is in sale since Monday, October 19, 2020. This item is in the category “Home & Garden\Tools & Workshop Equipment\Hand Tools\Pliers”. The seller is “luicos_1″ and is located in San Jose, California. This item can be shipped to United States.

• Brand: Klein Tools
• Type: End Cutting Pliers/Nippers
• Bundle Description: 5pc
• Country/Region of Manufacture: United States
• Number of Pieces: 5
• MPN: Does Not Apply

]]> https://cuttersettool.com/2020/11/04/klein-tools-pliers-and-cutters-set-of-5-piecesnew-open-package-2/feed/ 0 https://cuttersettool.com/2020/08/10/iso40-din2080-tool-package-cw-drill-set-facemill-cutter-tool-stand-collets/ https://cuttersettool.com/2020/08/10/iso40-din2080-tool-package-cw-drill-set-facemill-cutter-tool-stand-collets/#comments Mon, 10 Aug 2020 07:13:39 +0000 http://cuttersettool.com/2020/08/10/iso40-din2080-tool-package-cw-drill-set-facemill-cutter-tool-stand-collets/





3 x ER32 Collet Chucks & 18pc Collet Set. 50mm Facemill + 10 x APKT Inserts & Adaptor. Boring Head & 9 x Brazed Carbide Boring Tools. 1-13mm Keyless Drill Chuck & HSS Drill Set. 6 Position Huot Bench Rack. Suitable for all Milling Machine with ISO40 Spindles and M16 drawbars. All prices include VAT and a VAT invoice is supplied. Tel + 44 (0)24 7664 4949. The item “ISO40-DIN2080 Tool Package c/w Drill Set, Facemill Cutter, Tool Stand & Collets” is in sale since Friday, June 26, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machtechshop” and is located in Coventry, West Midlands. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Qatar, Trinidad and tobago, Uruguay, Viet nam.

• Machine Type: Vertical Milling Machine
• Spindle Taper: SK40-DIN2080 ISO40
• Function: Drilling
• Brand: Huot

]]> https://cuttersettool.com/2020/08/10/iso40-din2080-tool-package-cw-drill-set-facemill-cutter-tool-stand-collets/feed/ 0 https://cuttersettool.com/2020/08/02/snap-on-tools-3-piece-pliers-cutters-set-pl300cf-new-sealed-in-package-red/ https://cuttersettool.com/2020/08/02/snap-on-tools-3-piece-pliers-cutters-set-pl300cf-new-sealed-in-package-red/#comments Mon, 03 Aug 2020 02:05:41 +0000 http://cuttersettool.com/2020/08/02/snap-on-tools-3-piece-pliers-cutters-set-pl300cf-new-sealed-in-package-red/






Snap On Tools 3 Piece Pliers/ Cutters Set PL300CF new sealed in package (Red). Condition is New sealed in package never used. Includes 1 of each and storage tray. The item “Snap On Tools 3 Piece Pliers/ Cutters Set PL300CF new sealed in package (Red)” is in sale since Saturday, August 1, 2020. This item is in the category “eBay Motors\Automotive Tools & Supplies\Hand Tools\Pliers”. The seller is “crazytooldeals” and is located in Olympic Valley, California. This item can be shipped worldwide.

• Manufacturer Part Number: PL300CF 87ACF 96ACF 47ACF
• Brand: Snap-on
• Custom Bundle: Yes
• Number of Pieces: 3 pieces with storage tray
• Set or Single Item: Set
• Size: 8in.

]]> https://cuttersettool.com/2020/08/02/snap-on-tools-3-piece-pliers-cutters-set-pl300cf-new-sealed-in-package-red/feed/ 0 https://cuttersettool.com/2020/03/08/klein-tools-pliers-and-cutters-set-of-5-piecesnew-open-package/ https://cuttersettool.com/2020/03/08/klein-tools-pliers-and-cutters-set-of-5-piecesnew-open-package/#comments Mon, 09 Mar 2020 01:52:11 +0000 http://cuttersettool.com/2020/03/08/klein-tools-pliers-and-cutters-set-of-5-piecesnew-open-package/








Brand new never been used. Out of the package. See pictures for more details. 935RB level J2158cr strippers D2000-48 side cutters D213-9NE 63050 rabbit ears. The item “Klein Tools Pliers And Cutters Set of 5 PiecesNew open Package” is in sale since Monday, February 3, 2020. This item is in the category “Home & Garden\Tools & Workshop Equipment\Hand Tools\Pliers”. The seller is “luicos_1″ and is located in San Jose, California. This item can be shipped to United States.

• Brand: Klein Tools
• Type: End Cutting Pliers/Nippers
• Bundle Description: 5pc
• Country/Region of Manufacture: United States
• Number of Pieces: 5
• MPN: Does Not Apply

]]> https://cuttersettool.com/2020/03/08/klein-tools-pliers-and-cutters-set-of-5-piecesnew-open-package/feed/ 0 https://cuttersettool.com/2020/01/02/cat40-cnc-tooling-package-cutter-face-mill-collets-set-er32-16-industrial-pro/ https://cuttersettool.com/2020/01/02/cat40-cnc-tooling-package-cutter-face-mill-collets-set-er32-16-industrial-pro/#comments Fri, 03 Jan 2020 04:16:26 +0000 http://cuttersettool.com/2020/01/02/cat40-cnc-tooling-package-cutter-face-mill-collets-set-er32-16-industrial-pro/













Sign up to Newsletters. CAT40 TOOLING ER32 ER16 COLLET END MILL HOLDER DRILL CHUCK FACE MILL NEW. This product includes the following parts. 6PC CAT40 End Mill Holder. Projection Length: 2.5. 6PC Common Size: 1/4, 3/8, 1/2, 5/8, 3/4, 1. Precision high speed end mill holder for durability and rigidity. Holder balanced for accuracy. Provides a very close tolerance fit with minimum runout between the tool. Holder’s bore and the cutting tool. Thru Hole of the tool holder allows the use of Thru Coolant Tools when. Used with a Thru Coolant retention knob. 3PC CAT40 ER32 Chuck. 2PC CAT40 ER16 Chuck. Both ER32 and ER16 Chuck Gage or projection length of ER16 is 2.75. Fully ground flange and V-groove easy on tool changers for less spindle. V-Flange CAT 40 is production balanced to high speed spindle turning and. Meet standard industrial needs. High Speed True Balance in 15-20K RPM. Even though all sellers are saying balance, but it’s not true, few smart guy. Their description or over describe the item. It’s easy to find out balance or. Not, set spindle speed higher, and you’ll see the difference, could be couple. Thousands, true balanced holder works the same way at low and high speed. Even up 20K RPM, however, poor or not evenly balanced only works. Normally under low spindle speed. Hardened and ground to ensure maximum accuracy. Through spindle coolant capability from pull stud to collets. 1PC Precision Keyless Drill Chuck. Keyless Drill Chuck 1/2 Capacity. Drill chuck has very strong holding power. All Jaws are Hardened. V-Flange CAT 40 is production balanced and meet standard industrial. 1PC Face Mill Cutter. 5PC general purpose carbide inserts. It’s a combination of a tough, special cemented carbide substrate and. CVD coated grade for milling of steel up to 30-35 HRC before heat treat. 12PC ER32 Collets Set By 1/16. Made of high grade spring steel. Ground roughness is Ra0.4 Microns, plus overall fine polish. 12PC set by 16th: 1/8″; 3/16″; 7/32″, 1/4″; 5/16″; 3/8″; 7/16″; 1/2″; 9/16. 0.0003 or 5um. In order to make all collets running true, on your. Side, make sure your machine spindle and chuck holder running true, on my. Side, I’ll make sure all those collets running in tenth. Special angled slots increase rigidity. Better overall balance of tool holder assembly. Protects tool holder from contaminants. Use with any standard ER collet chucks for coolant-thru tool applications. 10PC ER16 Collets by 1/32. 10PC Size: 1/32″, 1/16″, 3/32″, 1/8″, 3/16″, 7/32″, 1/4″, 5/16″, 11/32″, 3/8″. Great variety of goods. High precision collet chuck. 6 X Common size end mill holder. 3 X ER32 collet chuck. 2 X ER16 collet chuck. 1 X 1/2 keyless drill chuck. 1 X Face mill cutter. 12 X ER32 collets set by 1/16. 10 X ER 16 collets set by 1/32. 25 Pcs ER32 Spring Collet Set. Chuck Pull stud Spanner Wrench. In Tenth, 0.0001-0.0002 max. 0.00012”- 0.0002” (0.003-0.005 mm). 0.00015 (0.004 mm). We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “CAT40 CNC Tooling Package Cutter Face Mill Collets Set ER32 16 Industrial Pro” is in sale since Saturday, July 14, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Other Toolholding”. The seller is “prettystylesoul” and is located in Rowland Heights, California. This item can be shipped to United States, all countries in Europe, Canada, Mexico, Australia.

• Brand: Vevor Laptop Screens
• MPN: 874AZ009
• Model: CAT40
• Country/Region of Manufacture: SFD235435
• Material: Steel
• warranty: 2-years
• Quantity: 35pcs
• 6PC: CAT40 End Mill Holder
• 3PC: CAT40 ER32 Chuck
• 2PC: CAT40 ER16 Chuck
• 1PC: 1/2 Precision Keyless Drill Chuck AND Face Mill Cutter
• 12PC: ER32 Collets Set By 1/16
• 10PC: ER16 Collets by 1/32
• NOTES: pls note the Haas studs

]]> https://cuttersettool.com/2020/01/02/cat40-cnc-tooling-package-cutter-face-mill-collets-set-er32-16-industrial-pro/feed/ 0 https://cuttersettool.com/2019/07/30/cat40-cnc-tooling-package-cutter-face-mill-collets-set-er32-16-industrial-tap/ https://cuttersettool.com/2019/07/30/cat40-cnc-tooling-package-cutter-face-mill-collets-set-er32-16-industrial-tap/#comments Tue, 30 Jul 2019 07:00:37 +0000 http://cuttersettool.com/2019/07/30/cat40-cnc-tooling-package-cutter-face-mill-collets-set-er32-16-industrial-tap/













CAT40 TOOLING ER32 ER16 COLLET END MILL HOLDER DRILL CHUCK FACE MILL NEW. This product includes the following parts. 6PC CAT40 End Mill Holder. Projection Length: 2.5. 6PC Common Size: 1/4, 3/8, 1/2, 5/8, 3/4, 1. Precision high speed end mill holder for durability and rigidity. Holder balanced for accuracy. Provides a very close tolerance fit with minimum runout between the tool. Holder’s bore and the cutting tool. Thru Hole of the tool holder allows the use of Thru Coolant Tools when. Used with a Thru Coolant retention knob. 3PC CAT40 ER32 Chuck. 2PC CAT40 ER16 Chuck. Both ER32 and ER16 Chuck Gage or projection length of ER16 is 2.75. Fully ground flange and V-groove easy on tool changers for less spindle. V-Flange CAT 40 is production balanced to high speed spindle turning and. Meet standard industrial needs. High Speed True Balance in 15-20K RPM. Even though all sellers are saying balance, but it’s not true, few smart guy. Their description or over describe the item. It’s easy to find out balance or. Not, set spindle speed higher, and you’ll see the difference, could be couple. Thousands, true balanced holder works the same way at low and high speed. Even up 20K RPM, however, poor or not evenly balanced only works. Normally under low spindle speed. Hardened and ground to ensure maximum accuracy. Through spindle coolant capability from pull stud to collets. 1PC Precision Keyless Drill Chuck. Keyless Drill Chuck 1/2 Capacity. Drill chuck has very strong holding power. All Jaws are Hardened. V-Flange CAT 40 is production balanced and meet standard industrial. 1PC Face Mill Cutter. 5PC general purpose carbide inserts. It’s a combination of a tough, special cemented carbide substrate and. CVD coated grade for milling of steel up to 30-35 HRC before heat treat. 12PC ER32 Collets Set By 1/16. Made of high grade spring steel. Ground roughness is Ra0.4 Microns, plus overall fine polish. 12PC set by 16th: 1/8″; 3/16″; 7/32″, 1/4″; 5/16″; 3/8″; 7/16″; 1/2″; 9/16. 0.0003 or 5um. In order to make all collets running true, on your. Side, make sure your machine spindle and chuck holder running true, on my. Side, I’ll make sure all those collets running in tenth. Special angled slots increase rigidity. Better overall balance of tool holder assembly. Protects tool holder from contaminants. Use with any standard ER collet chucks for coolant-thru tool applications. 10PC ER16 Collets by 1/32. 10PC Size: 1/32″, 1/16″, 3/32″, 1/8″, 3/16″, 7/32″, 1/4″, 5/16″, 11/32″, 3/8″. Great variety of goods. High precision collet chuck. 6 X Common size end mill holder. 3 X ER32 collet chuck. 2 X ER16 collet chuck. 1 X 1/2 keyless drill chuck. 1 X Face mill cutter. 12 X ER32 collets set by 1/16. 10 X ER 16 collets set by 1/32. Sign up to newsletter. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Caifornia Warehouse: 18501 Arenth Ave, City of Indus-try, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “CAT40 CNC Tooling Package Cutter Face Mill Collets Set ER32 16 Industrial Tap” is in sale since Thursday, June 14, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Other Toolholding”. The seller is “equipmentwholesaler1″ and is located in Perth Amboy, New Jersey. This item can be shipped to United States, all countries in Europe, Canada, Mexico, Australia.

• Brand: VEVOR
• MPN: FDGIR001
• Model: CAT40
• Country/Region of Manufacture: SFD235435
• Material: Steel
• warranty: 2-years
• Quantity: 35pcs
• 6PC: CAT40 End Mill Holder
• 3PC: CAT40 ER32 Chuck
• 2PC: CAT40 ER16 Chuck
• 1PC: 1/2 Precision Keyless Drill Chuck AND Face Mill Cutter
• 12PC: ER32 Collets Set By 1/16
• 10PC: ER16 Collets by 1/32

]]> https://cuttersettool.com/2019/07/30/cat40-cnc-tooling-package-cutter-face-mill-collets-set-er32-16-industrial-tap/feed/ 0 https://cuttersettool.com/2019/06/20/brm35a-b-mag-drill-by-bluerock-tools-1-annular-cutter-set-package-deal/ https://cuttersettool.com/2019/06/20/brm35a-b-mag-drill-by-bluerock-tools-1-annular-cutter-set-package-deal/#comments Fri, 21 Jun 2019 04:13:52 +0000 http://cuttersettool.com/2019/06/20/brm35a-b-mag-drill-by-bluerock-tools-1-annular-cutter-set-package-deal/













BLUEROCK ® Model BRM-35A-B Typhoon Magnetic Drill & 6 Pc Annular Cutter Set. Annular Cutter Drilling Capacity: 7/16-1 1/2. Annular Cutter Drilling Depth: 2. Tool Holder: Direct Arbor with ¾ Weldon Shank. Speed: 595 Revolutions per/min. Magnetic Adhesion: 2600 ft/lbs. Size: 19 x 15 x 8. Hard Plastic Carrying Case. 1-1/16″x1″ (includes centering pin). Standard Twist Drill Bit Capacity (with Free Chuck): Up to 1 with step drilling. Generally customers use smaller than 7/16 standard twist drills bits with this machine. Also note that only short bits can fit with the free chuck attached, as there is only 3.5 from magnetic base to bottom of the chuck. This is a brand NEW Magnetic Drill. It has an adapter, which allows for standard drill bits to be used. It comes with a hard plastic carrying case, oil bottle, safety chain, and drill bit adapter. We carry just about all the spare parts you’d ever need for this drill down the road. Weve been very impressed with the quality and longevity of this drill. If you have any questions or need any advice on magnetic drills or mag drill accessories, let us know. We hope you have a satisfactory experience and would like to take this time in asking that you rate us 5 stars across the board. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. The purchaser of this item acknowledges that TNTC shall in no way be responsible or liable to purchaser or any other party for any use or misuse of this item. The purchaser acknowledges that the purchaser has not and does not rely on TNTCs skill or judgment with regard to the selection of the goods as fit or suitable for any particular purpose. TNTC reserves the right to forum any legal disputes in courts residing in the State of Washington. The item “BRM35A-B Mag Drill by BLUEROCK Tools + 1 Annular Cutter Set, Package Deal” is in sale since Wednesday, March 20, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Drilling & Tapping Machines\Magnetic & Portable Drill Presses”. The seller is “bluerock-tools” and is located in Seattle, Washington. This item can be shipped to United States, Canada.

• Model: BRM35/BLACK + 1″ HSS
• Modified Item: No
• Custom Bundle: No
• MPN: BRM35/BLACK+1″HSS
• Brand: BLUEROCK ®
• Non-Domestic Product: No

]]> https://cuttersettool.com/2019/06/20/brm35a-b-mag-drill-by-bluerock-tools-1-annular-cutter-set-package-deal/feed/ 0