13PCS Tool Set Annular Cutter 7/16 TO 1-1/16 Drill Bits 1 inch Cutting Depth
December 19, 2024
13PCS Tool Set Annular Cutter 7/16″ TO 1-1/16″ Drill Bits 1 inch Cutting Depth. 13Pcs/Set Annular Cutter 7/16 to 1-1/16” Cutting Diameter Straight Shank NEW. Do you want to drill holes easier and faster? Then try this annular cutter set made of high-quality high-speed steel M2 material. It has different sizes of milling cutter bits, so you can easily drill holes of different sizes. The set is not only easy for you to carry around but also convenient for you to quickly select the tools you need! Drilling Partner: These annular bits drill large holes much faster than regular bits, and their magnetic bits are thin-walled with double alternating teeth, making it easier to make efficient and aggressive cuts than traditional hole saws and twist bits, saving you time and effort on the job. Ring Cutting: Its inserts are geometrically designed, making it easy to punch holes even at awkward angles. And because annular cutters have fewer teeth and less wear, drilling can be done at faster cutting speeds with ring cutters. Good Material: This annular cutter set is made of high-quality high-speed steel M2 material, with strong hardness and good corrosion resistance, so it can be used for a long time. Complete Specifications: This is a complete set of annular cutters that includes a variety of drill sizes(7/16, 1/2, 9/16, 11/16, 5/8, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16) for your convenience. And the different sizes of cutter heads provide you with more precise drilling. High Portability: With a weight of 1.2kg/ 2.65lbs, this annular cutter set is light enough to be carried anywhere you want, facilitating your daily use. Waste Reduction: These annular cutters re-sharpen and smooth burr-free and smooth holes, thus reducing scrap and material waste for you. Re-sharpening Use: It can be easily re-sharpened on a grinding machine and can be reused for drilling. Re-grinding can be done until the desired cutting length is available on the annular cutter. Neat Storage: We provide a storage box for this annular cutter set, so you can store each tool neatly together, and it is also convenient for you to quickly select when needed. Easy to Clean: You can easily clean it without much effort and time because of the smooth surface caused by high-speed steel M2 and plastic. If there is dust, just wipe it off with a rag. Customer Service: We aim to provide quality products and services. We will reply and solve the problem for you as soon as possible. Chip Chute: The reasonable chip chute design on the tool body can make the chip removal smoother and let you operate more easily. Pilot Pins: It is paired with pilot pins that have the functions of positioning, exporting coolant, and ejecting cores for your convenience. Three-edge Segment Cutting: It uses a three-edged segmented cutting design, which can maximize the protection of the head and is not easy to chipped teeth, so you can rest assured of long-term use. Straight Shank: It is designed with a non-slip straight shank for better tightness during operation, so you can use it with confidence. This annular cutter set fits most standard magnetic drills and machine tools, such as milling machines with tool shanks and large drilling machines. Material: High-speed Steel M2. Blade Size: 7/16, 1/2, 9/16, 11/16, 5/8, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16. Product Size: 24.524.54.5cm/ 9.89.81.7in. Package Size: 27.526.55.5cm/ 10.8310.432.17in. Net Weight: 1.2kg/ 2.65lbs. Gross Weight: 1.5kg/ 3.31lbs. 1 Set Annular Cutter. Please wear work clothes and protective glasses to prevent splashes of iron chips from hurting your skin and eyes. Please work with the product properly installed to prevent danger. When installing or removing the product, please do so with the power unplugged or disconnected. It is recommended to cut with coolant cutting, otherwise, the life of the drill bit will be affected. It is recommended to use it with a drill press or magnetic drill press. Please note that heat will be generated during the drilling process, so be careful of burns and the impact on the surrounding environment. Please do not modify the product and carry out drilling work without permission to prevent unforeseen things from happening. Please note that it is strictly forbidden to touch the product with your hands while it is rotating. If abnormalities such as vibration or sharp sound occur during operation, please stop the operation and check the product or replace it with a new one. Insert the ejector pin inside the annular cutter. Do not use an annular cutter without an ejector pin. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Compact Design, Unique Appearance, High Reliability. Stable Performance, Unique Appearance. 27.526.55.5cm/ 10.8310.432.17in. 1.2kg/ 2.65lbs. 1.5kg/ 3.31lbs. 24.524.54.5cm/ 9.89.81.7in. 7/16, 1/2, 9/16, 11/16, 5/8, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16.