Annular Cutter Set 13 Pcs by S&F STEAD & FAST, Cutting Depth 1 Cutting Diameter
January 11, 2026
Annular Cutter Set 13 Pcs by S&F STEAD & FAST, Cutting Depth 1″ Cutting Diameter 7/16″ to 1-1/16 Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins. Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life. 11 HSS core drill bit cutting tool assortment set with Outside Diameter in inches: 7/16″, 1/2″, 9/16″, 11/16″, 5/8″, 3/4″, 13/16″, 7/8″, 15/16″, 1″, 1-1/16,1 inch cutting depth for each drill cutter. CNC-machined high precision annular drill bit set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results. IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers. Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in. Secure workpiece firmly before drilling. If workpiece is less than 1/2″ thick, use a 3/8″ steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling. Compatible with various brands of magnetic drills including Alfra, BDS, Dewalt, Euroboor, Hougen, Ruko. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor for the drill bit cutter. Arbor is not included in this pack. Sturdy good-looking case holding an assortment of 11 annular bits, 2 pilot pins and a bonus hex wrench. On items which you are not completely satisfied with. You have the option for a. Outside of the US. That’s why your. Best to make sure. If there’s a. We’re happy to help.