Accusize Industrial Tools Hss Annular Cutter Set, 2” Cutting Depth, 7/16” to 1
November 26, 2022
Accusize Industrial Tools Hss Annular Cutter Set, 2” Cutting Depth, 7/16” to 1-1/16” Slugger Cutter, 8 Pcs/Set, HSS2-0000. Accusize Industrial Tools HSS2-0000 3/4″ Weldon Shank, 2″ DOC 8-Pc Set H. Accusize HSS2-0000 3/4″ Weldon Shank, 2″ DOC 8-Pc Set H. 1 piece #2, Dia. Of cut (in): 7/16. Of cut (in): 9/16′. Of cut (in): 11/16′. Of cut (in): 13/16′. Of cut (in): 15/16′. Of cut (in): 1-1/16′. 2 pieces pilot pin, 1/4”x4”, #0. Cutting Diameters range from 7/16″ to 1-1/16″. Depth of Cut: 2′. Cut slotting and overlapping holes, and outside edge in steel accurately, quickly and safely. Compared to usual drill bits, it drills larger diameter holes up to 10 times faster. Made of tough and high-speed tool steel – more durable than carbide-tipped cutters. With the use of lubricant, it gives machine-finish holes without the need of reaming. Annular Cutters are outstanding for hole-making processes, with faster cutting speed, more long-lasting and better hole finishing. Since annular cutters take less horsepower, they are especially suitable for machines with lower power so that you can save time and use more potential cutting tools. Compared to standard twist bits, they drill much larger holes with less force and time. They are the solution of making holes on metal. Accurate burr-free holes are produced with tight tolerances without pre-drilling or step drilling. Suitable for cutters with weldonshank. For cutters with diameter of cut: 7/16″ to 2-11/32″. Diameter: 1/4; Overall Length: 4′. Every 2 cutting teeth = 1 group. The height difference between the tooth shapes optimizes the geometry of cutting edges. Grouped and layered cutting and optimized centring improve the removal of chips and give a fast feed rate. Features of High-speed Steel Annular Cutters. An annular cutter is a type of drilling tool, which is also called a Rotabroach, core cutter, broach cutter, magnetic drill, mag drill, core drill, trepanning drill, hole saw and cup-type cutter. They are outstanding for the hole-making process. These cutters only cut the outside edges of holes and they take less horsepower so they help save time for machines with lower power. Good for harder steel. Drill much larger holes and require less force and time than standard twist bits. Take less horsepower, suitable for lower power machines. Significantly faster than interpolating with an end mill. Much more long-lasting than twist drills or hole saws. Less expensive than indexable drills, twist drills, and end mills. Eject a’slug’, the cylindrical steel from the cutter’s center, after the hole is cut. Chips are produced from the outside cutting edges. The cutting geometry improves the efficiency and drill life of the annular cutters. It increases cutting performance and reduces cutting force. The cutting angles are effective for general use in various sorts of steel. The U-shaped recesses improve the chip removal performance. The special geometry of the recesses reduces the thermal load on the cutter since most of the heat produced during cutting is removed with the chips. The spiral-shaped guide chamfers reduce the friction between the core drill and the workpiece. Accusize N2 3/4″ Weldon Shank, 2″ DOC 13-Pc Set H. S Annular Cutters Accusize N10 3/4″ Weldon Shank, 1″ DOC 13-Pc Set H. S Annular Cutters Accusize HSS1-0000 3/4″ Weldon Shank, 1″ DOC 8-Pc Set H. S Annular Cutters Accusize HSS2-0000 3/4″ Weldon Shank, 2″ DOC 8-Pc Set H. S Annular Cutters Accusize AC01-1000 3/4″ Weldon Shank, 1″ DOC 7-Pc Set M35 Cobalt Annular Cutters Accusize BC01-1000 3/4″ Shank, 1″ DOC 7-Pc Set TiN Coated H. S Annular Cutters Item # N2 N10 HSS1-0000 HSS2-0000 AC01-1000 BC01-1000 Range 7/16 to 1-1/16 inch 7/16 to 1-1/16 inch 7/16 to 1-1/16 inch 7/16 to 1-1/16 inch 9/16 to 15/16 inch 9/16 to 15/16 inch Cutting Depth 2 inches 1 inch 1 inch 2 inches 1 inch 1 inch No. Of cutters 11 11 6 6 6 6 No. Of pilot pins 2 2 2 2 1 1 Package Type Strong Plastic Strong Plastic Strong Plastic Strong Plastic Metal Metal Material H. S M35 Cobalt H. S, TiN Coated 3/4 Weldon Shank? 2 inch cutting depth, 3/4 inch weldon shank Annular cutter kit. Includes 6pcs Annular cutter and 2 pcs Pilot pins. Optimal for steel and iron cutting. Extra information maybe required when cutting other materials, such as stainless steel and aluminum. Cutting diameter of each cutter 7/16, 9/16, 11/16”, 13/16”, 15/16”, 1-1/16” Pilot pin size 1/4”x4′. Cuts holes in steel accurately, quickly & safely Large holes can be drilled up to ten times faster than regular drills bits Make overlapping holes, slotting holes and edge cuts. Made from tough, high-speed tool steel Machine finish hole, no reaming needed when used with lubricant American Standard(ANSI). Width: 0 x height: 0 x length: 0 x weight: 0. We stand behind our products. Most orders are in transit for two days but some may take longer. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Supplies\Other Metalworking Supplies”. The seller is “findthishere” and is located in this country: US. This item can be shipped to United States.
- Brand: Accusize Industrial Tools
- Item model number: HCS2-0000
- Date First Available: December 16, 2013
- Manufacturer: Accusize Co., Ltd.